Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- In the Box and Unpacking
- Setting Up LSX II
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI ARC input
- Playback with Optical Input
- Playback with USB Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
- Maintenance Guide for Kvadrat Fabrics
- Important Safety Information & Specifications
- Warranty
45
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
13. Playback with Auxiliary Input
You can connect your devices with 3.5 mm audio output (e.g. turntables, computers,
portable music players) to the speakers through an audio cable. The speakers must
always be first connected to your local network before auxiliary connection.
13.1 Auxiliary Cable Connection
Connect the audio output jack of your device and the auxiliary input jack (X) on the
back of the Primary Speaker via a 3.5 mm audio cable.