Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- In the Box and Unpacking
- Setting Up LSX II
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI ARC input
- Playback with Optical Input
- Playback with USB Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
- Maintenance Guide for Kvadrat Fabrics
- Important Safety Information & Specifications
- Warranty
93
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
Speaker Pattern Status
Primary
and
Secondary
Blinking red slowly
The firmware update process failed.
1. Unplug the power cables from both speakers.
2. Wait approximately 60 seconds.
3. Plug the power cables back to both speakers.
4. Performthermwareupdateagainonthe
KEF Connect App.
If the problem persists, please send a log from
the KEF Connect App (Settings > Support >
Report issue).
Primary
Blinking red and light
blue slowly
The Secondary Speaker is missing during
firmware update.
*The LED indicator light illuminates briefly and fades out when there are no active
interactions with the speakers (e.g. controlling playback or volume).