Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- Safety
- In the Box and Unpacking
- Controls and Connections
- Status Indication (LED indicator)
- Setting Up the LSX
- Control Interface
- Playback and Streaming
- Cleaning and Maintenance
- Storage
- FAQ and Troubleshooting
- Resetting to Factory Default
- Specifications
- Disposal
- Appendix
- Owner's Manual
- Contents
- Introduction
- First Time Setup
- Controls & Connections
- Audio Specifications
- KEF Control App
- KEF Stream App
- Wi-Fi Operation
- Bluetooth
- Optical
- AUX & Analog Inputs
- Digital Signal Processor
- TIDAL
- Spotify Connect
- Roon
- Apple AirPlay 2
- Subwoofer Operation
- Updating the Firmware
- Care & Cleaning
- Troubleshooting Guide
- Appendices
- Trademarks
- Quick Start Guide
- Specs
- Maintenance Guide for Kvadrat Fabrics
- Safety Information
- Warranty Information
18
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
7.4.2 Android and iOS (Non Airplay 2) Method
Airplay 2 is available from firmware version 4.0. After firmware upgrade, iOS
users should follow the chapter "iOS (Airplay 2) Method" to perform the setup.
1. To connect LSX to your network, open the KEF Control app on your device. Select
“KEF LSX” from the selection menu and then tap “Next”.
2. Connect the power cables to the AC input connectors at the back of the speakers.
Then tap “Next”.
3. The LED indicator on the Master Speaker will ash orange and white, indicating that
the speakers are ready for connection. Tap “Next”.
1. 2. 3.
4. Tap the Home button of your device.
5. Open the “Settings” app of your device.
6. Select “Wi-Fi”.
7. Select “LSX_XXX” from the available networks.