Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- Safety
- In the Box and Unpacking
- Controls and Connections
- Status Indication (LED indicator)
- Setting Up the LSX
- Control Interface
- Playback and Streaming
- Cleaning and Maintenance
- Storage
- FAQ and Troubleshooting
- Resetting to Factory Default
- Specifications
- Disposal
- Appendix
- Owner's Manual
- Contents
- Introduction
- First Time Setup
- Controls & Connections
- Audio Specifications
- KEF Control App
- KEF Stream App
- Wi-Fi Operation
- Bluetooth
- Optical
- AUX & Analog Inputs
- Digital Signal Processor
- TIDAL
- Spotify Connect
- Roon
- Apple AirPlay 2
- Subwoofer Operation
- Updating the Firmware
- Care & Cleaning
- Troubleshooting Guide
- Appendices
- Trademarks
- Quick Start Guide
- Specs
- Maintenance Guide for Kvadrat Fabrics
- Safety Information
- Warranty Information
57
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
9. How to setup the speaker without Wi-Fi network?
Using the LSX without a Wi-Fi network is not recommended and severely limits the
usability of the speaker.
In addition, you will miss out important updates including bug fixes and new features.
To set up the speaker without a Wi-Fi network
1. The speaker must be in Setup Mode. The Master Speaker’s LED should be
alternating between white and orange. If it is not, you will have to factory reset into
Setup Mode. Please refer to "Resetting to Factory Default" for details.
2. Point the physical remote control at the Master Speaker and then hold the "source"
button for 5 seconds until the LED alternates between blue and orange. This
indicates that Wi-Fi Mode has been disabled. In this mode the Wi-Fi source is
disabled.
To resume using the LSX with a Wi-Fi connection, reset the speaker to Setup Mode.
Please refer to "Resetting to Factory Default" for factory reset into Setup Mode.