Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- Safety
- In the Box and Unpacking
- Controls and Connections
- Status Indication (LED indicator)
- Setting Up the LSX
- Control Interface
- Playback and Streaming
- Cleaning and Maintenance
- Storage
- FAQ and Troubleshooting
- Resetting to Factory Default
- Specifications
- Disposal
- Appendix
- Owner's Manual
- Contents
- Introduction
- First Time Setup
- Controls & Connections
- Audio Specifications
- KEF Control App
- KEF Stream App
- Wi-Fi Operation
- Bluetooth
- Optical
- AUX & Analog Inputs
- Digital Signal Processor
- TIDAL
- Spotify Connect
- Roon
- Apple AirPlay 2
- Subwoofer Operation
- Updating the Firmware
- Care & Cleaning
- Troubleshooting Guide
- Appendices
- Trademarks
- Quick Start Guide
- Specs
- Maintenance Guide for Kvadrat Fabrics
- Safety Information
- Warranty Information
Normal cleaning
Regular cleaning is important in order to keep the fabric looking its best
and to prolong its life. Vacuum frequently, ideally every week. May also
be vacuum cleaned with a soft brush.
Stain removal
Scrape off any liquids or hardened residues with a spoon or a scoop.
Any loose particles must be vacuum cleaned before further cleaning.
Liquids must be soaked up with an absorbent napkin or cloth.
Remove non-greasy stains by carefully dabbing with a lint-free cloth
or sponge wrung out in warm water. Edge marks can be avoided by
dabbing gently in circular motions towards the centre of the stain
with a clean lint-free cloth. Remove greasy stains by using appropriate
detergents or solvents. In all cases, we recommend to test stain-
removal agents on an inconspicuous area first, to see if there is any
effect on the fabric.
Warnings
1) Do not rub the material hard because this could result in loss of
colour or potentially damage the nap.
2) Never use un-concentrated detergents or bleach, ammonia or soap
intended for hard surfaces.
Fabric Maintenance Guide_V04.indd 2 2018/7/10 10:49:23