Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- Safety
- In the Box and Unpacking
- Controls and Connections
- Status Indication (LED indicator)
- Setting Up the LSX
- Control Interface
- Playback and Streaming
- Cleaning and Maintenance
- Storage
- FAQ and Troubleshooting
- Resetting to Factory Default
- Specifications
- Disposal
- Appendix
- Owner's Manual
- Contents
- Introduction
- First Time Setup
- Controls & Connections
- Audio Specifications
- KEF Control App
- KEF Stream App
- Wi-Fi Operation
- Bluetooth
- Optical
- AUX & Analog Inputs
- Digital Signal Processor
- TIDAL
- Spotify Connect
- Roon
- Apple AirPlay 2
- Subwoofer Operation
- Updating the Firmware
- Care & Cleaning
- Troubleshooting Guide
- Appendices
- Trademarks
- Quick Start Guide
- Specs
- Maintenance Guide for Kvadrat Fabrics
- Safety Information
- Warranty Information
13
VOLUME SETTINGS
HARDWARE VOLUME BUTTONS
Occasionally you may encounter a situation where the setting for
the number of volume steps between the KEF Control app and the
streaming service you are using are different. This may cause the
volume to jump unexpectedly while adjusting the volume using the
hardware volume controls (device rocker switches).
If this occurs, disable the hardware volume control to eliminate
the issue.
VOLUME BUTTON SENSITIVITY
This allows you to set the volume step movement for each single
press of the device rocker switches.
ENABLE LIMITATION
When switched on, this setting allows you to limit the maximum
output volume. The settings are in percentages.
SPEAKER INFO
Access default product information. In the event your LSX needs
service or support some of this information may need to be
supplied to our Support Team.
• Speaker Name: The name you gave your speakers
during the onboarding process
• MAC Address: (Media Access Control address) is the
network address of the device
• IP Address: Internet Protocol address of your LSX
• Speaker Serial No.: The factory issued serial number
of your LSX
• Firmware Version: The current loaded and operating
firmware in your system
• Forget Speaker: Select this when resetting your
speaker or if you need to re-onboard your LSX. This will
erase all stored information in the Control app
FIRMWARE UPDATE
This screen alerts you to new firmware
releases. Select UPDATE to download
the latest firmware to your LSX. (pg 24)
The interspeaker cable must be
connected to perform firmware
updates.
In order to keep your LSX
operating optimally, please be
sure to update the firmware as
soon as possible after updates become
available.
SEND LOGS & FEEDBACK
In the event you encounter a problem with your LSX, please
contact our Support Team and send our Development Team a log
of the activity at the time of the failure or issue. (pg 31)
This information is extremely helpful to our Support Techs in
diagnosing the issue. Feedback from the field is also an invaluable
aid to our Development Team.
KEF Control App