Information Sheet

LS Family
IP Driver Control
IR Commands
IP Control
KEF’s LS family of wireless, digital music systems can be integrated into the most common home
automation control systems via our custom-developed control driver applications. These drivers
can be downloaded as follows:
Control 4: https://www.intrinsicdev.co.uk/downloads/kef_ls50w_c4/
Crestron: https://www.intrinsicdev.co.uk/downloads/kef-ls50w-for-crestron/
Elan: https://www.intrinsicdev.co.uk/downloads/kef_ls50w_elan/
RTi: https://www.intrinsicdev.co.uk/downloads/kef-ls50w-for-rti/
SAVANT: https://www.intrinsicdev.co.uk/downloads/category/savant/media-savant/
For support and information on these drivers please contact our development partner Intrinsic(DEV) directly: https://www.intrinsicdev.co.uk/
Important information for integrators and developers:
• These drivers do not control streaming (handled by the app)
• LSX supports Wake On LAN (WOL)
• LS50 supports WOL from serial number LS50W13074K24L/R2G inclusive.
1. Users of units prior to that serial number who wish to avoid powering on the LS50
Wireless separately from their home automation system will need to disable sleep
mode on the LS50 Wireless
IR Control
The LS family of wireless products are also compatible with common universal remote controls.
LS remote codes are available in the URC and Logitech databases and are factory embedded in
Harmony Series remotes among others. Consult your remote control manufacturer’s database.
Page two of this document contains the short form IR commands.
• IR (Infrared) Discrete Commands are available for all LSX systems and all LS50 Wireless
systems manufactured after serial number 06256J33
• Long form hex codes for IR are available from KEF Support.