Use and Care Manual

www.kegco.com 6 1-888-980-4810
Operation Instructions
The refrigerator should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If
the ambient temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate.
When you first plug in your Kegco refrigerator, the LED display will show the “live” cabinet temperature in Fahrenheit
and the thermostat will be set to 41 degrees Fahrenheit (5 degrees Celsius). The operating panel includes several other
features to operate and control the temperature of the refrigerator:
Press either button once and release to enter the SET mode; the LED display will begin to flash and show the
previous temperature setting, signifying that the temperature is ready to be adjusted
Each depression of either button will increase or decrease the temperature incrementally by one degree
Fahrenheit or Celsius until the desired temperature is reached, between 36-46 degrees Fahrenheit (2-8 degrees Celsius)
NOTE: After a button is pressed, the display will flash for 5 seconds before returning to displaying the internal
temperature of the cabinet
Press the button to alternate the display between Fahrenheit and Celsius; the corresponding pilot light adjacent
to the selector will illuminate to signify which temperature mode has been selected for display
If you are going on vacation, you may leave the refrigerator operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.
PLEASE NOTE: In the event of a power failure, any modified settings will be lost and the default settings will be restored
once the power resumes.