INSTRUCTION MANUAL FULL SIZE KEGERATOR MODEL:MDK-209 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO Distributed and Serviced by BEVERAGE FACTORY 8510 Miralani Dr., San Diego, CA 92126 www.kegco.
Table of Contents Diagram and Description ....................................................................................................................................... 3 Safety Tips ....................................................................................................................................... 4 Installation Instructions .......................................................................................................................................
Diagram and Description 1. Top Cover 2. Cabinet 3. CO2 Tank Holder 4. Control Board Device 5. Compressor Cover 6. Guard Rail www.kegco.com 7. Removable Drip Tray 8. Cold Plate 9. Door 10. Keg Plate 11.
Safety Tips Before using this appliance, it must be properly positioned and installed as described in this manual, so please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic precautions. Failure to heed these safety requirements may result in severe personal injury or death. • • • • • • • Plug into a grounded 3-prong outlet.
Installation Instructions BEFORE USE: • Remove the exterior and interior packaging. • Before connecting the unit to the power source, let it stand upright for approximately 8 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth. • This appliance is designed for freestanding use.
Keg Configuration The Kegco MDK-209 Kegerator is large enough to fit one full-size keg and a dispense system including a 5 lb CO2 tank. Because of it's roomy interior, you are able to configure the MDK-209 to hold multiple kegs as well. It can hold one Quarter Slim or up to two 5 Gallon Commercial Kegs, and up to three 5 Gallon Cornelius Home Brew Kegs, making it a very versatile option for your draft beer needs.
Troubleshooting There are many common issues you may experience with your kegerator that can be solved very easily, without the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems: PROBLEM Kegerator does not operate Kegerator is not cold enough Kegerator is turning on and off frequently Vibrations The kegerator seems to make too much noise The door will not close properly www.kegco.
Technical Specifications Keg Capacity One Full-Size Keg or One Pony Keg or One Quarter Slim Keg or Up to Two 5 Gallon Commercial Kegs or Up to Three 5 Gallon Cornelius Home Brew Kegs Dimensions 33-5/8" H x 23-5/8" W x 23-5/8" D Cubic Footage 5.6 Cubic Feet Weight 81.6 lbs. (empty) Voltage / Frequency 115v / 60 Hz Running Amps 0.86 A Refrigerant R600a Operating Temperature 34°F - 45°F Maximum Ambient Temperature www.kegco.
www.kegco.
Warranty Information WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.