INSTRUCTION MANUAL FULL SIZE KEGERATOR MODEL:MDK-199 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO 8520 Miralani Dr., San Diego, CA 92126 www.kegco.
Table of Contents Diagram and Description ....................................................................................................................................... 3 Safety Tips ....................................................................................................................................... 4 Installation Instructions .......................................................................................................................................
Diagram and Description 1. Draft Tower 2. Mylar Washer 3. Guard Rail 4. Drip Tray 5. Adjustable Thermostat 6. CO2 Regulator 7. CO2 Tank www.kegco.com 3 8. CO2 Tank Holder 9. Cold Plate 10. Reversible Door 11. Keg (not included) 12. Keg Plate 13. Metal Bracket 14.
Safety Tips Before using this appliance, it must be properly positioned and installed as described in this manual, so please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic precautions. Failure to heed these safety requirements may result in severe personal injury or death. • • • • • • • Plug into a grounded 3-prong outlet.
Installation Instructions BEFORE USE: • Remove the exterior and interior packaging. • Before connecting the unit to the power source, let it stand upright for approximately 8 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth. • This appliance is designed for freestanding use.
Keg Configuration The Kegco MDK-199 Kegerator is large enough to fit most full-size kegs and a dispense system including a 5 lb CO2 tank. Coors Kegs, Rubber Kegs and other kegs that are beveled wider in the middle than the top and bottom will not fit. The MDK-199 is able to hold multiple kegs as well. It can hold up to two 5 Gallon Commercial Kegs or 5 Gallon Cornelius Home Brew Kegs, making it a very versatile option for your draft beer needs.
Care and Maintenance Cleaning your kegerator: • Turn off the power, unplug the appliance, and remove all items including the dispense kit. • Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. • Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.
Technical Specifications Keg Capacity One Full-Size Keg or One Pony Keg or One Quarter Slim or Up to two 5 Gallon Commercial / 5 Gallon Cornelius Home Brew Kegs Dimensions 33-1/2" H x 20" W x 24-13/16" D Cubic Footage 4.9 Cubic Feet Weight 66.1 lbs. (empty) Voltage / Frequency 115v / 60 Hz Running Amps 1.1 A Refrigerant R600a Operating Temperature 34°F - 45°F Maximum Ambient Temperature www.kegco.
www.kegco.
Warranty Information WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.