INSTRUCTION MANUAL HK-38 FULL SIZE KEGERATOR BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO 8520 Miralani Dr., San Diego, CA 92126 www.kegco.
Table of Contents Safety Tips ....................................................................................................................................... 3 Installation Instructions ....................................................................................................................................... 4 Caster Installation .......................................................................................................................................
Safety Tips Before using this appliance, it must be properly positioned and installed as described in this manual, so please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic precautions. Failure to heed these safety requirements may result in severe personal injury or death. • • • • • • • Plug into a grounded 3-prong outlet.
Installation Instructions BEFORE USE: • Remove the exterior and interior packaging, but do not remove any foam insulation surrounding the pipes at the back. • Before connecting the unit to the power source, let it stand upright for approximately 8 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth.
Operation Instructions The Kegco Kegerator is able to maintain the proper dispensing temperature for beer, provided it is installed correctly in the proper environment. For best results, mount the draft tower as close to the top of the kegerator as possible and seal any openings to prevent heat transfer. Avoid opening and closing the door of the kegerator too often to ensure a consistent temperature inside the unit.
Care and Maintenance Cleaning your kegerator: • Turn off the power, unplug the appliance, and remove all items including the dispense kit. • Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. • Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.
Troubleshooting There are many common issues you may experience with your kegerator that can be solved very easily, without the need of a service call.
Technical Specifications Keg Capacity One Full-Size Keg or Two Quarter Slim Kegs or Three 5 Gallon Commercial Kegs or Three 5 Gallon Cornelius Home Brew Kegs Dimensions 34-1/8" H x 24" W x 25" D (without Handle) Weight 115 lbs. (empty) Voltage / Frequency 110v / 60 Hz Running Amps 1.0 A Operating Temperature 23°F - 59°F Ambient Temperature 50°F – 109.4°F www.kegco.
Warranty Information WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.