Use and Care Manual

www.kegco.com 5 1-888-980-4810
Operation Instructions
The Kegco Kegerator is able to maintain the proper dispensing temperature for beer, provided it is installed correctly in
the proper environment. For best results, mount the draft tower as close to the top of the kegerator as possible and
seal any openings to prevent heat transfer. Avoid opening and closing the door of the kegerator too often to ensure a
consistent temperature inside the unit. Beer is dispensed best between 32-38 degrees Fahrenheit (factory preset
temperature is 32 degrees Fahrenheit). If it is kept below or above that range, you may experience foam issues.
The kegerator should be placed in an area where the ambient temperature range is between 50-109.4 degrees
Fahrenheit (10-43 degrees Celsius). If the ambient temperature is above or below this range, the performance of the
unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures
to fluctuate. Please be aware that the desired temperatures may fluctuate depending on the ambient temperature and
the orientation of the keg.
Your Kegco Kegerator includes an operating panel on the front of the unit. The operating panel includes several features
to operate and control the temperature of the kegerator, including:
To turn the appliance ON or OFF, press and hold the POWER key for 5 seconds
Press to view the set temperature; if no other operations are performed for 6 seconds, the display will return to
displaying the actual temperature in the cooler
Press the SET key first and then the UP or DOWN button to increase (warm) or decrease (cool) the set
temperature by 1 degree increments
Press and and hold for 6 seconds to change the display from Fahrenheit to Celsius or Celsius to Fahrenheit
Press and hold for 6 seconds to manually defrost the unit; press and hold again to stop defrosting
Press to manually turn the interior light on or off
If you are going on vacation, you may leave the kegerator operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.
NOTE: Keep a thermometer handy and adjust temperature control settings as necessary according to your needs.