User Manual

ManualsBrandsKeith McMillen ManualsAmplificationK Mix - AUDIO INTERFACE + PROGRAMMABLE MIXER + CONTROL SURFACE WITH 2 MIC PREAMP

101

102

103

104

105

106

107

108

109

110

K-MIX EDITOR

5.1.1.6 – SEND ALL BUTTON

The SEND ALL button is used to send all presets in the Setlist down to the

mixer. This is essentially a less cumbersome way of clicking every individual

SEND button.

5.1.1.7 – RECEIVE ALL BUTTON

The RECEIVE ALL button is used to copy all presets currently stored on the

connected K-Mix hardware into the editor. Similar to the SEND ALL button,

the RECEIVE ALL button is a less cumbersome way of clicking every individual

RECEIVE button.

5.1.1.8 – SETLIST

This section is where you can select which presets will be loaded onto

your K-Mix, and the order they will appear in. It is extremely important to

become familiar with the Setlist if you intend to use your K-Mix’s preset

storage capabilities.

SLOTS A–L

These 12 slots hold the presets that will go onto your K-Mix when

synced.

• Slots A–L correspond to presets A–L on the mixer hardware. If you

place a preset named “Drums” on slot C and send it to the mixer,

the “Drums” preset will be loaded anytime preset C is recalled from

the mixer.

• Each slot has a drop-down menu that lets you select which preset to load in the selected slot.

Simply click the drop-down menu and select a preset to load it into that slot. The drop-down

menu will have a list of all presets currently in the Preset Library.

• A preset may not be loaded in multiple setlist slots (unless it is the special DEFAULT option). If

you would like multiple preset slots to have the same settings it is recommended you create

multiple copies of that preset (via the SAVE AS button). Another alternative is to just use a single

preset and not use K-Mix’s preset capabilities.

There are two special options available in the Setlist drop-down menus:

[OFF]

[OFF] is one of two special options available in the Setlist drop-down menus.

• When a Setlist slot is set to [OFF], that slot will no longer participate in editor-to-mixer and

mixer-to-editor syncing. It will skip that slot when the SEND ALL button is clicked, and the

editor will skip that slot when syncing presets.

Simply selecting a preset in a Setlist slot does not automatically place them onto

your connected K-Mix. Presets must be sent to the mixer by using either the SEND

button or the SEND ALL button.