User Manual

K-MIX EDITOR
91
• Setting a slot to [OFF] will not delete any preset that may have already been present in the
selected slot on the K-Mix hardware. It will remain there unaltered; it is solely the sending/
receiving/syncing that will have been disabled.
[DEFAULT]
[DEFAULT is the second of two special options available in the setlist drop-down menus.
• Selecting [DEFAULT] sets that preset slot to K-Mix’s default preset (a blank or “normalled”
preset). When sending a [DEFAULT] preset, the editor will send down a blank, default preset
to that slot. When receiving/syncing, it will always use the “Save Into New Preset” behavior.
SEND BUTTON
Each slot in the Setlist has its own SEND button. The SEND buttons are for
sending just a single preset down to the connected K-Mix, one at a time.
• Whatever preset is selected in the Setlist slot’s drop-down menu will be
sent down to the mixer, overwriting whatever preset was in that slot on the
K-Mix hardware.
• To use, just click the SEND button and the selected slot’s preset will be sent to the board.
EXAMPLE USE
1. Click the SEND button on slot B.
2. Whatever preset is currently in slot B’s drop-down menu will be sent down to the mixer,
overwriting whatever was in the mixer’s B preset slot.
RECEIVE BUTTON
In addition to the SEND button, each slot in the Setlist has its own RECEIVE
button. The RECEIVE buttons perform the reverse behavior of the SEND
buttons — they read a preset from the mixer and place it in the editor.
When a RECEIVE button is clicked, the editor presents you with a choice
between saving to a new preset, or copying into the corresponding Setlist preset.
SAVE INTO NEW PRESET
The “Save Into New Preset” option does just that — saves the mixer preset as a new preset in the
Preset Library. It is very similar to “Save As” behavior.
A Setlist slot’s SEND button is only available if a preset is selected for that slot. If a
slot is set to [OFF], its SEND button will be greyed out and inaccessible.
A Setlist slot’s RECEIVE button is only available if a preset is selected for that slot. If a
slot is set to [OFF], its RECEIVE button will be greyed out an inaccessible.