User Manual
K-MIX EDITOR
102
• Clicking the button will toggle the state of the bypass.
• The button will light up blue when enabled (EQ on).
• The button will go dark when disabled (EQ bypassed).
LOW
The EQ’s lower band is a sweepable, dual-pole, low-shelving lter.
FREQUENCY KNOB & NUMBER BOX
The low frequency knob controls the center frequency of the low-shelf lter.
• Turn clockwise to increase the frequency; turn counterclockwise to decrease the
frequency.
• A specic value may be entered into the accompanying number box as an alternative
way of setting the frequency.
• Range: 20Hz – 400Hz
CUT/BOOST KNOB & NUMBER BOX
The cut/boost knob controls the amount of cut or boost the low-shelf lter will apply.
• Turn clockwise to increase (boost); turn counterclockwise to decrease (cut).
• A specic value may be entered into the accompanying number box as an alternative
way of setting the cut/boost level.
• Range: ±18dB
MID
The EQ’s middle band is a fully parametric bandpass lter, sporting controls for frequency, gain,
and Q (bandwidth).
FREQUENCY KNOB & NUMBER BOX
The mid frequency knob controls the center frequency of the mid-band EQ.
• Turn clockwise to increase the frequency; turn counterclockwise to decrease the
frequency.
• A specic value may be entered into the accompanying number box as an alternative
way of setting the frequency.
• Range: 200Hz – 6kHz
CUT/BOOST KNOB & NUMBER BOX
The cut/boost knob controls the amount of cut or boost the mid-band EQ will apply.
• Turn clockwise to increase (boost); turn counterclockwise to decrease (cut).
• A specic value may be entered into the accompanying number box as an alternative
way of setting the cut/boost level.