User Manual

K-MIX EDITOR
108
the level going to the aux; the send level fader will be the only level control.
• When set to “Post”, the currently selected channel’s volume fader will have an effect on
the audio going to the aux. Both the send level fader and the input channel’s volume
fader are in control of audio going to the aux. If the send level fader is all the way up, but
the volume fader for the selected channel is all the way down (or muted), no audio will
be sent to the auxes.
Regardless of how the pre/post switch is set, the audio will always be post-DSP
effects (EQ, gate, compressor). Please refer to the K-Mix Signal Flow Diagram to see
exactly where the audio is tapped.