User Manual

K-MIX EDITOR
119
5.2.3.6 – SAVE GLOBALS BUTTON
Used to save the current state of all global settings to the K-Mix hardware’s internal memory.
Any changes made in the editor to “global” parameters (parameters that are not stored on a per preset
basis) will be immediately reected and heard on the connected mixer, but they will not be stored in its
internal memory. If power is lost and the K-Mix is turned on again, all changes will be lost; it will boot up
with its last saved state. When you have found settings you would like to keep, it is wise to use the Save
Globals button to make sure your global settings are not forgotten.
The other method to make sure your global settings are remembered between power cycles is to
power down your K-Mix by holding down the [ ] for three seconds. Powering down in this manner will
ensure all global settings are saved to your K-Mix’s internal memory; simply unplugging your K-Mix from
its power source will not do this. More information about global parameters can be found in section
5.1.1.10 – “Global” Parameters vs. “Per Preset” parameters.
5.2.4 – MIDI TAB
This is where all of K-Mix’s MIDI-related options are located.
• All MIDI parameters are global parameters; they are not settable on a preset by preset basis.
5.2.4.1 – SENSOR SELECTOR
Used to select a K-Mix fader, button, or rotary to edit.
• Click on the desired sensor and the editable MIDI parameters will
pop up just to the left of the K-Mix image in the MIDI Parameters
Section.
SAVE GLOBALS
All MIDI options are editor-only parameters. They may not be adjusted from the
mixer.
MIDI
Bank 1 CC#
1 2 3
Bank 2Bank 1 Bank 3
Bank 2 CC#
Bank 3 CC#
CHANNEL 1 FADER
MIDI CHANNEL
Main
8
3
4
5
6
7
Aux 3 Aux 2Aux 1
3
4
5
6
7
8
1
2
21
Mic / Line
Inst / Line
=
=
SAVE GLOBALS
1
2
3
Main
8
3
4
5
6
7
Aux 3 Aux 2Aux 1
3
4
5
6
7
8
1
2
21
Mic / Line
Inst / Line
=
=