User Manual

K-MIX EDITOR
12 5
5.3.1.3 – PHANTOM VOLTAGE
Sets whether the phantom power provided on channels 1 and 2 is operating at +12V or +48V.
• +12V = Phantom power is providing +12V when enabled
• +48V = Phantom power is providing +48V when enabled
5.3.1.4 – CHANNELS 3–8 LINE/PHONO SWITCHES
Sets whether channels 3–8 are expecting line level or phono level signals. Each channel has its own
switch with two possible states:
• Line = Input channel is expecting line level signals
• Phono = Input channel is expecting phono level signals
Typically “Phono” will only be used when plugging turntables directly into K-Mix. Most other equipment
will operate at line level.
This is an editor-only parameter. It may not be adjusted from the mixer.