User Manual
FEATURES OVERVIEW
36
3.6.5 – “RUMBLE” FILTER
Each of the 8 input channels has an optional high-pass lter at the beginning of the DSP chain. This is
intended to be used as a “rumble lter”, removing microphone handling noise or the “thump” that may
occur when bumping a turntable.
The rumble lters can only be controlled from the K-Mix Editor.
3.7 – STEREO PANNING
K-Mix allows you to individually set each channel’s left/right panning for each of the four output bus pairs
(Main, Aux 1, Aux 2, Aux 3).
All stereo panning parameters can be adjusted directly from the K-Mix hardware or the K-Mix Editor.
3.8 – SURROUND PANNING
In addition to stereo panning, K-Mix is able to leverage its multiple outputs and rotary controls to spatialize
audio in multiple surround sound formats.
3.8.1 – MULTIPLE SPEAKER LAYOUTS
K-Mix’s surround panning is able to work with a number of standard speaker congurations. Quad, 5.1, 7.1,
and Octophonic.
The speakers are laid out as follows:
All surround formats begin with speaker 1 at the front-left position and increment clockwise. This may
run contrary to established 5.1 and 7.1 lm standards, but it makes plugging output channels into the
appropriate speakers much easier.
The surround speaker layout parameter may only be adjusted from the K-Mix Editor.
3.8.2 – AMBISONICS
K-Mix utilizes Ambisonics panning algorithms to ensure a high quality soundstage when working in a
surround sound environment.
8
1 2
3
4
56
7
OCTAGON
22.5º
67.5º
112.5
-67.5º
-112.5
157.5
-22.5º
-157.5
1 3
2
5 4
5.1
30º
0º
-30º
110º-110º
SUB (BASS MANAGEMENT MUST BE ENABLED)
1 2
34
QUAD
45º
135º-135º
-45º
1 3
2
6
7 4
5
7.1
SUB (BASS MANAGEMENT MUST BE ENABLED)
30º
150º
0º
-30º
-150º
110º-110º
SUB (BASS MANAGEMENT MUST BE ENABLED)SUB (BASS MANAGEMENT MUST BE ENABLED)