User Manual

FEATURES OVERVIEW
38
3.11 – FADER GROUPS
K-Mix’s faders can be “grouped” (or “linked”); when one fader is adjusted, the other faders in the same group
follow along. There are four available fader groups on K-Mix. Fader group options may only be accessed
through the K-Mix Editor.
3.12 – VU METERING
Using the LEDs underneath each fader’s surface, K-Mix is able to display VU meters for a number of different
points in the mixer signal ow.
Different mixer “modes” will show you different VU meter readings. Trim mode shows pre-fader, pre-DSP levels;
Mains mode shows post-DSP, post-fader levels; Reverb mode shows post-reverb send levels; the Aux modes
show post-aux send levels.
VU metering can be enabled/disabled directly from the K-Mix hardware.
3.13 – K-MIX EDITOR INTEGRATION
The K-Mix hardware is tightly integrated with the freely available K-Mix Editor software application (available
here). The K-Mix Editor allows you to edit all mixer parameters in real time (plus a few that aren’t available
directly from the mixer itself) and manage your preset library.
Bi-directional communication between the editor and mixer provides synchronous feedback — changes made
in the editor will be reected immediately on the mixer; changes made on the mixer itself will be reected
immediately in the editor.
All info regarding the operation of the K-Mix Editor can be found in the K-Mix Editor section.
3.14 – TEST TONE GENERATOR*
K-Mix has its own test tone generator onboard with an adjustable frequency from 40Hz–4000Hz.
The test tone can be accessed and controlled directly from the K-Mix hardware or via the K-Mix Editor.
* Available in a future update.