User Manual

K-MIX HARDWARE
45
effect; it allows for ne-tuning the extra functions that are normally accessed via the [SHIFT] button, like
the attack time in Compressor Mode.
EXAMPLE USE
Here is an example of using [SHIFT] to ne-tune the attack time of a compressor.
1. Enter Compressor Mode by pressing the [COMP] button.
2. Press the [FINE] button to enter ne-tuning mode.
3. Press and hold the [SHIFT] button. Rotaries 1, 2, and 4 will go dark (they don’t control anything
while [SHIFT] is held). Rotary 3 will stay lit up.
4. Move rotary 3 clockwise or counterclockwise to adjust the compressor’s attack time with extra
precision.
5. When done adjusting the attack time, release the [SHIFT] button.
6. Press the [FINE] button to exit ne-tuning mode.
Also note that you are able to do steps 2 and 3 in the reverse order. You can press and hold [SHIFT]
rst to access the attack time, then press [FINE] to ne-tune. Fine-tuning can be engaged and
disengaged while [SHIFT] is held down.