User Manual

K-MIX HARDWARE
66
4.2.15.2 – ADJUSTING EQ SETTINGS
To edit a channel’s EQ settings, do the following:
1. Press the [EQ] button to go into EQ mode.
2. Press one of the channel select buttons to select a channel to edit. The currently selected channel
will light up green — all others are red. The rotary LEDs will immediately snap to the selected
channel’s EQ settings.
3. Adjust any of the four rotaries to adjust the EQ settings.
4.2.15.3 – [SHIFT] FUNCTIONALITY
When in EQ Mode, the [SHIFT] button is used to access the extra parameters from the rotaries — Low
Frequency, High Frequency, and Mid Q (Bandwidth).
When [SHIFT] is held down, rotary 1 controls Low Frequency, rotary 3 controls Mid Q, and rotary 4
controls High Frequency. Rotary 2 has no [SHIFT] functionality.
EXAMPLE USE
1. Press the [EQ] button to go into EQ Mode.
2. Select a channel by pressing its channel select button.
3. Press and hold the [SHIFT] button.
4. While [SHIFT] is still held down, adjust rotary 1, 3, or 4 to alter the Low Frequency, Mid Q, or
High Frequency parameters.
5. Release the [SHIFT] button to go back to normal rotary behavior.
Since the faders function the same as they do in Mains Mode, [SHIFT] can also be
used to solo and mute channels via the faders.