User Manual

K-MIX HARDWARE

4.3.3.4 – MISC. PARAMETERS (REVERB/SURROUND/AUXES)

All other K-Mix parameters that do not fall under the input channels or main output bus are controlled

via MIDI CC messages sent on MIDI channel 10.

The following list details the parameters that may be controlled and the MIDI CCs that are used to

control them.

4.3.3.5 – CHANGING PRESETS WITH PROGRAM CHANGE MESSAGES

Program change messages sent to the K-Mix Audio Control port can be used to change the currently

loaded K-Mix preset.

• Program change 1–12 will load presets 1–12 (A–L), respectively.

• Program change messages can be on any MIDI channel, they just need to be sent to the K-Mix

Audio Control port.

4.3.3.6 – MIDI CONTROL WHEN NOT IN MIX BANK

It is entirely possible to control K-Mix’s Mix bank parameters via external MIDI messages when you are

not currently in the Mix bank (if you’re in MIDI bank 2, for example). There will be no visual indication

that parameters have changed, but they will update in the background and you will immediately hear

the change reected in audio output (assuming the change was an audible one).

External MIDI messages for controlling Aux 1–3 output levels and mutes will be

ignored when surround panning is enabled; these parameters are not accessible

when using surround.

External MIDI messages for controlling Surround parameters will be ignored when

stereo panning is enabled; these parameters are only accessible when using

surround.

• Reverb Channel Send Levels 1–8 = CCs 1–8

• Reverb PreDelay = CC 9

• Reverb Decay Time = CC 10

• Reverb Damping = CC 11

• Reverb Diffusion = CC 12

• Reverb Level = CC 13

• Reverb Bypass = CC 14

• Surround Panner 1 Angle = CC 15

• Surround Panner 1 Radius = CC 16

• Surround Panner 2 Angle = CC 17

• Surround Panner 2 Radius = CC 18

• Surround Panner 3 Angle = CC 19

• Surround Panner 3 Radius = CC 20

• Surround Panner 4 Angle = CC 21

• Surround Panner 4 Radius = CC 22

• Aux 1 Fader/Output Level = CC 23

• Aux 1 Mute = CC 24

• Aux 2 Fader/Output Level = CC 25

• Aux 2 Mute = CC 26

• Aux 3 Fader/Output Level = CC 27

• Aux 3 Mute = CC 28