Manualshelf

User manual

ManualsBrandsKEITHLEY ManualsTest & MeasurementBench multimeter digital 2110 CAT II 600 V Display (counts): 100000
41424344454647484950
Model 2110
5½ Digit Multimeter Reference Manual Section 2:
General overview
2110-901-01 Rev. C/August 2013 2-23
Selecting the initial operating mode
The Model 2110 provides the option to save the current operating settings or restore the factory
default settings when the instrument is turned on. Refer to Power-on settings (on page 1-6
) for
information about default settings.
To select the initial mode, use the following procedure:
1. Press the SHIFT and CONFIG (MENU) keys to display the MENU options.
2. Use the ► and ◄ keys to display SYSTEM, and then press the ENTER key.
3. Use the ▲ and ▼ keys to display INIT MODE, and then press the ENTER key.
4. If you want to save the current settings, use the ► and ◄ keys to display SAVE DATA, and then
press the ENTER key. Go to Step 6.
5. If you want to restore the default settings, use the ► and ◄ keys to display DEFAULT SET, and
then press the ENTER key.
6. When finished, press ESC.
Selecting the language
You can choose the following languages for programming the remote commands.
• Default: Select DEFAULT for compatibility with all Model 2110 features and functions and KI-
Tool and KI-Link software.
• Compatible: Select COMPATIBLE for SCPI-compliant DMM language mode. When you select
COMPATIBLE, the SYST:IDNS "<Manufacturer>,<Model>" allows you to modify the *IDN? return
string to any manufacturer and model number.
You can also set the language from the remote interface. To set compatible mode, send the
command L1. To return to the default *IDN? string, send the command L0.
The language setting is stored in nonvolatile memory.
To select the language, use the following procedure:
1. Press the SHIFT and CONFIG (MENU) keys to display the MENU options.
2. Use the ► and ◄ keys to display SYSTEM, and then press the ENTER key.
3. Use the ► and ◄ keys to display LANGUAGE, and then press the ENTER key.
4. If you want to use the default language, use the ► and ◄ keys to display DEFAULT, and then
press the ENTER key. Go to Step 6.
5. If you want to use the compatible language, use the ► and ◄ keys to display COMPATIBLE, and
then press the ENTER key.
6. When finished, press ESC.