User Manual

Section 4: Command reference Series 2200 Programmable DC Power Supplies Reference Manual
4-14 2200S-901-01 Rev. A/November 2011
[SOURce:]LIST:CURRent[:LEVel]
This command sets the current for a list step in units of A or mA.
Group
Source
Syntax
[SOURce:]LIST:CURRent[:LEVel] <NR1>,<current>
[SOURce:]LIST:CURRent[:LEVel]? <NR1>
Related
Commands
[SOURce:]LIST:VOLTage[:LEVel] (on page 4-17)
[SOURce:]LIST:WIDth (on page 4-18)
Arguments
<NR1> is an integer in the range from 1 to 80, , which is a step
number in the active list.
<current>::=<NRf>[<units]
where
<NRf> is a flexible decimal number used to specify a current
setting in the range 0 amperes to the nameplate current rating of
the power supply.
<units>::={A|mA}
Returns
<NR2> is a decimal representing the current setting in amperes for
the step specified in the query.
Examples
LIST:CURR 1, 3A
LIST:CURR? 1 might respond with 3.0000, which indicates the
current level setting for step number 1.