User Manual

Section 4: Command reference Series 2200 Programmable DC Power Supplies Reference Manual

4-16 2200S-901-01 Rev. A/November 2011

[SOURce:]LIST:SAVe (no query form)

This command saves the active list file to a storage location in non-

volatile memory.

Group

Source

Syntax

[SOURce:]LIST:SAVe <NR1>

Commands

[SOURce:]LIST:RCL (no query form) (on page 4-15)

Arguments

<NR1> is an integer in the range from 1 to 8, representing a list

storage location.

Examples

LIST:SAV 4 saves the active list in list storage location 4.

[SOURce:]LIST:STEP

This command configures the number of steps in the active list.

The number of steps must be configured before loading the

voltage levels, current levels, and/or durations of the steps.

Group

Source

Syntax

[SOURce:]LIST:STEP {<NR1>|MIN|MAX}

[SOURce:]LIST:STEP?

Commands

[SOURce:]LIST:COUNt (on page 4-13),

[SOURce:]LIST:MODE (on page 4-15)

Arguments

<NR1> is an integer in the range from 2 to 80, representing the

number of steps to be configured in the list.

Returns

<NR1> is the number of steps configured in the active list.

Examples

Examples are provided in Programming examples (on page 4-42).