Data Sheet

ManualsBrandsKeithley ManualsBench power supply unitsKeithley Bench PSU (adjustable voltage) 0 - 30 Vdc 0 - 1.5 A 120 W GPIB No. of outputs 3 x

DC POWER SUPPLIES

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY

(U.S. only)

The Models 2220, 2220G, 2230, and 2230G Multi-Channel Programmable DC Power Supplies com-

bine two and three channels of output power to cost-effectively characterize and test a wide range of

devices, circuit boards, modules, and products that require more than one power source. The Models

2220-30-1 and 2220G-30-1 supplies provide two channels, with each channel capable of outputting

up to 30V and up to 1.5A. The Models 2230-30-1 and 2230G-30-1 include two 30V/1.5A channels

and add a 6V channel with up to 5A output for powering digital circuits. These multi-channel power

supplies offer an excellent combination of performance, versatility, and ease of use to maximize the

information from characterization or test as quickly and as easily as possible. They perform as effec-

tively in automated test systems as they do in manual instrument configurations. The USB interface is

standard on all models; the “G” versions add a GPIB interface.

Independent and Isolated Outputs

Since each channel in these multi-channel power supplies is completely independent and isolated

from each other, these power supplies can be used to provide power to two circuits that are optically

isolated or transformer-isolated from each other and have different reference points. Their isolated

channels eliminate the need for a second power supply to power one of the isolated circuits.

Additionally, each channel can be independent-

ly controlled, so channels can be individually

turned on and turned off at any time. Thus,

these power supplies can be used to power up a

circuit with multiple voltage levels (such as a dig-

ital circuit) that must be turned on in a specified

time sequence. Furthermore, the timer capability

allows you to set up unattended tests that turn

off the channels after a programmed time inter-

val to protect a device-under-test (DUT) from

potential damage due to the continuous appli-

cation of power beyond a recommended time

interval. Both isolated and independent chan-

nels provide excellent versatility and flexibility to

address a wide range of test applications.

Accurate Power Delivery to the Load

With basic voltage setting accuracy and voltage

readback accuracy of 0.03% for each channel,

the exact voltage programmed for any channel

is applied at the output terminals. Plus, the

rear panel connections for each channel include remote sense terminals that compensate for voltage

drops in the power supply leads. This helps to ensure that the correct voltage is delivered accurately

to the load terminals of the DUT. Many other multi-channel power supplies do not provide remote

sensing, which reduces overall system accuracy.

• Dual and triple output

models with two 30V/1.5A

(45W) channels and a 6V/5A

(30W) channel on the triple

output supply

• All channels are independently

controlled and have isolated

outputs for maximum flexibility

• All channels have remote

sensing to ensure that

programmed voltage is

accurately applied to the load

• Two 30V channels can be

combined either in series to

double output voltage or in

parallel to double output current

• 0.03% basic voltage output

accuracy and 0.1% current

accuracy ensure quality test data

• Low noise, linear regulation with

<3mVpp ripple and noise

• Voltage and current outputs

for all channels are displayed

simultaneously for easy

observation of each output state

• Keypad entry allows fast, precise

entry of output values

• USB interface standard on all

versions for remote control; “G”

versions include USB and GPIB

interfaces

2220, 2220G,

2230, 2230G

Multi-Channel USB and USB/GPIB

Programmable DC Power Supplies

++––

2230-30-1 TRIPLE CHANNEL DC POWER SUPPLY

CH1 0-30VCH2 0-30VCH3 0-5.5V

Power two isolated circuits with isolated

output channels.

3-Year

Warranty

Multi-channel programmable DC power supplies

Summary of content (4 pages)

PAGE 1
• All channels are independently controlled and have isolated outputs for maximum flexibility • All channels have remote sensing to ensure that programmed voltage is accurately applied to the load • Two 30V channels can be combined either in series to double output voltage or in parallel to double output current • 0.03% basic voltage output accuracy and 0.
PAGE 2
Multi-channel programmable DC power supplies Ordering Information 2220-30-1 Programmable Dual Channel DC Power Supply 2220G-30-1 Programmable Dual Channel DC Power Supply with GPIB Interface 2220J-30-1 Programmable Dual Channel DC Power Supply for Japan 2220GJ-30-1 Programmable Dual Channel DC Power Supply with GPIB Interface for Japan 2230-30-1 Programmable Triple Channel DC Power Supply 2230G-30-1 Programmable Triple Channel DC Power Supply with GPIB Interface 2230J-30-1 Programmable Triple Channel DC Po
PAGE 3
Multi-Channel USB and USB/GPIB Programmable DC Power Supplies • To save time when repeating tests, instrument settings can be saved in one of 30 internal memory locations by simply pressing the Save button. To recall that setting, just push the Recall button, and choose the desired setup. Specifications Easy Test Automation Two interface choices are available to enable PC control from a user-preferred programming environment.
PAGE 4
2220, 2220G, 2230, 2230G Multi-Channel USB and USB/GPIB Programmable DC Power Supplies Temperature: Operating: 0° to +40°C. Storage: –20° to +70°C. Relative Humidity (non-condensing): Operating: 5% to 95% relative humidity at up to +40°C. Storage: 5% to 95% relative humidity at up to +40°C. 5% to 60% RH above +40°C up to +70°C, non condensing. Altitude: Operating: Up to 2000m. Storage: Up to 4000m. Safety: European Union: Complies with European Union EMC Directive.