Datasheet

DC POWER SUPPLIES
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Greater Measure of Confidence
Series 2290
High Voltage Power Supplies
ACCESSORIES AVAILABLE
For 2290-5:
2290-5-SHV 5kV SHV Female–SHV Female Cable,
3m (10 ft)
2290-5-MHV 5kV SHV Female–MHV Male Cable, 3m (10 ft)
2290-5-SHVBH 5kV SHV Male Bulkhead Connector
2290-5-RMK-1 Single Fixed Rack Mount Kit for 5kV
Power Supply
2290-5-RMK-2 Dual Fixed Rack Mount Kit for 5kV
Power Supply
For 2290-10:
2290-10-SHVUC 10kV SHV Male to Unterminated Cable,
3m (10ft)
2290-10-SHV 10kV SHV Male–SHV Male Cable, 3m (10 ft)
2290-10-SHVBH 10kV SHV Female Bulkhead Connector
2290-10-RMK-1 Single Fixed Rack Mount Kit for 10kV
Power Supply
2290-10-RMK-2 Dual Fixed Rack Mount Kit for 10kV
Power Supply
For both:
2290-PM-200 10kV Protection Module
2290-INT-CABLE 3-Pin Connector to Unterminated
Interlock Cable
4299-7 Fixed Shelf Rack Mount Kit
KPCI-488LPA IEEE-488.2 Interface Board for the PCI Bus
KUSB-488B IEEE-488.2 USB-GPIB Interface Adapter for USB
port with built-in 2m (6.6 ft) cable
7007-05 Double Shielded Premium IEEE-488 Interface
Cable, 0.5m (1.6 ft)
7007-1 Double Shielded Premium IEEE-488 Interface
Cable, 1m (3.2 ft)
7007-2 Double Shielded Premium IEEE-488 Interface
Cable, 2m (6.5 ft)
7007-3 Double Shielded Premium IEEE-488 Interface
Cable, 3m (10 ft)
7007-4 Double Shielded Premium IEEE-488 Interface
Cable, 4m (13 ft)
SERVICES AVAILABLE
Model Number*-EW 1 Year Factory Warranty extended one
additional year from date of shipment
Model Number-3Y-EW 1 Year Factory Warranty extended
to 3 years frçom date of shipment
Model Number-5Y-EW 1 Year Factory Warranty extended
to 5 years from date of shipment
C/Model Number-3Y-STD KeithleyCare 3 Year Standard
Calibration Plan
C/Model Number-3Y-DATA KeithleyCare 3 Year Calibration
with Data Plan
C/Model Number-5Y-STD KeithleyCare 5 Year Standard
Calibration Plan
C/Model Number-5Y-DATA KeithleyCare 5 Year Calibration
with Data Plan
*Insert model number. Examples: 2290-5-EW, C/2290E-10-3Y-STD
Make Precise Current Measurements Lower Than 1µA
Use a sensitive Keithley measurement instrument, such as a Keithley SourceMeter
®
Source Measure
Unit (SMU) instrument, to measure current drawn by the device under test (DUT) that is below the
sensitivity of the Series 2290 Power Supplies. Keithley SourceMeter SMU instruments can provide
sensitivity as low as 0.1fA. The following diagram shows how the Model 2290-PM-200 Protection
Module protects the low voltage SourceMeter SMU instrument from high voltages when the DUT
breaks down. The leakage current of the protection module limits the measurement resolution to
picoamp levels, which is five decades more sensitive than the current measurement resolution of the
Series 2290 Power Supplies. Keithley can provide a complete high voltage test capability with the
most current measurement sensitivity available anywhere.
A
Model 2290-5
High Voltage
Power Supply
Model 263xB
System
SourceMeter SMU
Instrument
configured as
an ammeter
Model
2290-PM-200
Protection
Module
PM
Reverse breakdown testing of a high voltage diode using a Keithley SourceMeter SMU
instrument to measure leakage current. The Model 2290-PM-200 SMU Protection Module
protects the SourceMeter SMU instrument from high voltage when the diode breaks down.
Easily Automate a High Voltage Test System
The Series 2290’s IEEE-488 interface allows the creation of an automated high voltage test system.
Software drivers are supplied to simplify and accelerate test system development. This further
enhances safety as the high voltage can be controlled from a remote location.
High voltage power supplies High voltage power supplies