Datasheet

ManualsBrandsKeithley ManualsBench Power SuppliesGraphical Potentiostat, 6x 20W, 10 nA ... 1 A

Datasheet

TEK.COM10

Common Mode Isolation >1 GΩ, <1000 pF.

Noise Rejection (typical)

NPLC NMRR CMRR

0.01 — 60 dB

0.1 — 60 dB

1 60 dB 100 dB

* Except lowest two current ranges ~90dB.

Load Impedance 20 nF typical (standard). Stable into 50 μF typical (High-C mode).

High-C mode valid for ≥100 μA range s, ≥200 mV ranges.

Max. Voltage Drop Between Force and Sense Terminals

5 V.

Max. Sense Lead Resistance 1 MΩ for rated accuracy.

Sense Input Impedance >10 G Ω.

Guard Offset Voltage <300 μV, typical

System Measurement Speeds

Reading Rates (readings/second) typical for 60 Hz (50 Hz):

Script (TSP) Programmed

Measure Source-Measure Sweep

NPLC/Trigger Origin To Mem. To GPIB To USB To L AN To Mem. To GPIB To USB To L AN

0.01 / Internal 3130 (2800) 2830 (2570) 2825 (2600) 2790 (2530) 1710 (1620) 1620 (1540) 1630 (1540) 1620 (1540)

0.01 / External 2170 (2050) 2150 (2030) 2170 (2040) 2160 (1990) 1670 (1590) 1580 (1500) 1590 (1510) 1580 (1510)

0.1 / Internal 540 (460) 530 (450) 530 (450) 530 (450) 470 (410) 460 (400) 470 (400) 470 (400)

0.1 / External 500 (430) 490 (420) 500 (430) 500 (420) 470 (400) 460 (390) 460 (400) 460 (400)

1.00 / Internal 59 (49) 58 (49) 59 (49) 59 (49) 58 (48) 58 (48) 58 (48) 58 (48)

1.00 / External 58 (48) 57 (48) 58 (48) 58 (48) 57 (48) 57 (47) 57 (48) 57 (48)

SCPI Programmed

Measure Source-Measure Sweep

NPLC/Trigger Origin To Mem. To GPIB To USB To L AN To Mem. To GPIB To USB To L AN

0.01 / Internal 3130 (2800) 3060 (2760) 3000 (2790) 3010 (2710) 1710 (1630) 1610 (1600) 1440 (1380) 1690 (1590)

0.01 / External 2350 (2200) 2320 (2170) 2340 (2190) 2320 (2130) 1680 (1590) 1560 (1570) 1410 (1360) 1660 (1560)

0.1 / Internal 540 (460) 540 (450) 540 (460) 540 (450) 470 (410) 470 (410) 450 (390) 470 (410)

0.1 / External 510 (440) 510 (430) 510 (440) 510 (430) 470 (400) 470 (400) 450 (390) 470 (400)

1.00 / Internal 59 (49) 59 (49) 59 (49) 59 (49) 58 (48) 58 (48) 57 (48) 58 (48)

1.00 / External 58 (49) 58 (49) 58 (49) 58 (49) 58 (48) 58 (48) 57 (47) 58 (48)

Notes

1. Reading rates applicable for voltage or current measurements, autozero off, autorange off, filter off, binary reading format, and source readback off.

2. SCPI programming mode. Speeds do not apply to SCPI 2400 mode.