Datasheet

TEK.COM 11
2450-EC Graphical Potentiostat
General Characteristics (default mode unless specified)
Factory Default Standard
Power-Up SCPI Mode.
Source Output Modes Fixed DC Level, Memory/Configuration List (mixed function), Stair (linear and log).
Source Memory List 100 points max. (SCPI 2400 Mode only).
Memory Buffer >250,000 readings. Includes selected measured value(s) and time stamp.
Real-Time Clock Lithium battery backup (3 yr. + battery life).
Remote Interfaces
GPIB IEEE-488.1 compliant. Supports IEEE-488.2 common commands and status model topology.
USB Device
(rear panel, type B) 2.0 Full Speed USBTMC.
USB Host
(front panel, type A) USB 2.0, support for flash drives, FAT32.
Ethernet RJ-45 (10/100BT ).
Digital I/O Interface:
Lines 6 Input/Output user defined for digital I/O or triggering.
Connector 9-pin female D.
Input Signal Levels 0.7 V (maximum logic low), 3.7 V (minimum logic high).
Input Voltage Limits –0.25 V (Abs. minimum), +5.25 V (Abs. maximum).
Maximum Source Current +2.0 mA @ >2.7 V (per pin).
Maximum Sink Current –50 mA @ 0.7 V (per pin, solid-state fuse protected).
5V Power Supply Pin Limited to 500 mA @ >4 V (solid-state fuse protected).
Handler User definable Start of Test, End of Test, 4 category bits.
Programmability SCPI or TSP command sets.
TSP Mode Embedded Test Script Processor (TSP) accessible from any host interface.
IP Configuration Static or DHCP.
Expansion Interface The TSP-Link expansion interface allows TSP enabled instruments to trigger and communicate with
each other.
LXI Compliance 1.4 LXI Core 2011.
Display 5 inch capacitive touch, color TFT WVGA (800×480) with LED backlight.
Input Signal Connections Front: Banana. Rear: Triaxial (3-lug).
Interlock Active High Input.
Cooling Forced air, variable speed.
Over Temperature Protection Internally sensed temperature overload puts unit in standby mode.
Power Supply 100 V to 240 V RMS, 50–60 Hz (automatically detected at power up).
VA Rating 190 volt-amps max.
Altitude Maximum 2000 meters above sea level.
EMC Conforms to European Union EMC Directive.
Safety NRTL listed to UL61010-1 and UL61010-2-30. Conforms with European Union Low Voltage Directive.
Vibration MIL-PRF-28800F Class 3 Random.