Datasheet

ManualsBrandsKeithley ManualsBench Power SuppliesSource Measurement Unit, 1x 100W, 1 uA ... 7 A

SMU INSTRUMENTS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY

(U.S. only)

2460

SourceMeter

SMU Instrument

100 Watt, 7 Amps

Voltage Specifications

1, 2

Source Measure

Range

Max.

Current

Reso-

lution

Accuracy

(23° ±5°C), 1 Year

±(% setting+volts)

Noise

(RMS)

(<10Hz)

Reso-

lution

Input

Resistance

Accuracy

(23° ±5°C), 1 Year

±(% rdg. + volts)

200.0000 mV 7.35 A 5 μV 0.015 % + 200 μV 1 μV 100 nV >10 GW 0.012 % + 200 μV

2.000000 V 7.35 A 50 μV 0.015 % + 300 μV 10 μV 1 μV >10 GW 0.012 % + 300 μV

7.000000 V 7.35 A 250 μV 0.015 % + 2.4 mV 100 μV 1 μV >10 GW 0.015 % + 1 mV

10.00000 V 5.25 A 500 μV 0.015 % + 2.4 mV 100 μV 10 μV >10 GW 0.015 % + 1 mV

20.00000 V 4.20 A 500 μV 0.015 % + 2.4 mV 100 μV 10 μV >10 GW 0.015 % + 1 mV

100.0000 V 1.05 A 2.5 mV 0.015 % + 15 mV 1 mV 100 μV >10 GW 0.015 % + 5 mV

Current Specifications

1, 2, 5

Source Measure

Range

Max.

Voltage

Reso-

lution

Accuracy

(23° ±5°C), 1 Year

±(% setting + amps)

Noise

(RMS)

(<10Hz)

Reso-

lution

Voltage

Burden

Accuracy

(23° ±5°C), 1 Year

±(% rdg. + amps)

1.000000 μA 105 V 50 pA 0.025 % + 1 nA 40 pA 10 pA <100 μV 0.025 % + 700 pA

10.00000 μA 105 V 500 pA 0.025 % + 1.5 nA 40 pA 10 pA <100 μV 0.025 % + 1 nA

100.0000 μA 105 V 5 nA 0.020 % + 15 nA 100 pA 100 pA <100 μV 0.020 % + 10 nA

1.000000 mA 105 V 50 nA 0.020 % + 150 nA 1 nA 1 nA <100 μV 0.020 % + 100 nA

10.00000 mA 105 V 500 nA 0.020 % + 1.5 μA 10 nA 10 nA <100 μV 0.020 % + 1 μA

100.0000 mA 105 V 5 μA 0.020 % + 15 μA 100 nA 100 nA <100 μV 0.020 % + 10 μA

1.000000 A 105 V 50 μA 0.050 % + 750 μA 5 μA 1 μA <100 μV 0.050 % + 500 μA

4.000000 A 21 V 250 μA 0.100 % + 3 mA 25 μA 1 μA <100 μV 0.100 % + 2.5 mA

5.000000 A 10.5 V 250 μA 0.100 % + 3 mA 25 μA 1 μA <100 μV 0.100 % + 2.5 mA

7.000000 A 7.35 V 500 μA 0.150 % + 6 mA 125 μA 1 μA <100 μV 0.150 % + 5 mA

TEMPERATURE COEFFICIENT (0°–18°C and 28°–50°C): ±(0.10 × accuracy specification)/°C.

1. Speed = 1 PLC.

2. All specifications are guaranteed with output ON.

3. Accuracies apply to 2- and 4-wire mode when properly zeroed.

4. 6.5-digit measure resolution.

5. Accuracy specifications guaranteed when using 2460-KIT screw terminal accessory.

6. Four-wire mode.

Resistance Measurement Accuracy (Local or Remote Sense)

7, 8, 9

Range

Default

Resolution

Default

Test Current

Normal Accuracy

(23°C ±5°C)

1 Year, ±(% rdg. + ohms)

Enhanced Accuracy

(23°C ±5°C)

1 Year, ±(% rdg. + ohms)

<2.000000 W

1 μW User deﬁned Source I

ACC

+ Meas. V

ACC

Meas. I

ACC

+ Meas. V

ACC

20.00000 W 10 μW 100 mA 0.05 % + 0.003 W 0.04 % + 0.001 W

200.0000 W 100 μW 10 mA 0.05 % + 0.03 W 0.04 % + 0.01 W

2.000000 kW 1 mW 1 mA 0.05 % + 0.3 W 0.04 % + 0.1 W

20.00000 kW 10 mW 100 μA 0.05 % + 3 W 0.04 % + 1 W

200.0000 kW 100 mW 10 μA 0.05 % + 30 W 0.05 % + 10 W

2.000000 MW 1 W 10 μA 0.06 % + 100 W 0.06 % + 50 W

20.00000 MW 10 W 1 μA 0.14 % + 1000 W 0.12 % + 500 W

>20.0000 MW

— User deﬁned Source I

ACC

+ Meas. V

ACC

Meas. I

ACC

+ Meas. V

ACC

TEMPERATURE COEFFICIENT (0°–18°C and 28°–50°C): ±(0.10 × accuracy specification)/°C.

SOURCE CURRENT, MEASURE RESISTANCE MODE:

Total uncertainty = I source accuracy + V measure accuracy (4-wire remote sense).

SOURCE VOLTAGE, MEASURE RESISTANCE MODE:

Total uncertainty = V source accuracy + I measure accuracy (4-wire remote sense).

7. Speed = 1 PLC.

8. All specifications are guaranteed with output ON.

9. Accuracies apply to 2- and 4-wire mode when properly zeroed.

10. 6.5-digit measure resolution.

11. Source readback enabled. Offset compensation ON.

12. Source current, measure resistance or source voltage, measure resistance only.

ACCESSORIES AVAILABLE

TEST LEADS AND PROBES

1754 2-wire Universal 10-Piece Test Lead Kit

5805 Kelvin (4-Wire) Spring-Loaded Probes

5808 Low Cost Single-pin Kelvin Probe Set

5809 Low Cost Kelvin Clip Lead Set

8605 High Performance Modular Test Leads

8606 High Performance Modular Probe Kit

8608 High Performance Clip Lead Set

CABLES, CONNECTORS, ADAPTERS

2460-BAN Screw Terminal Connector to Banana Cable

2460-KIT Mating Mass Termination Connector

8607 2-Wire, 1000V Banana Cables, 1m (3.3 ft.)

CS-1616-3 Safety Interlock Mating Connector

COMMUNICATION INTERFACES & CABLES

7007-1 Shielded GPIB Cable, 1m (3.3 ft)

7007-2 Shielded GPIB Cable, 1m (6.6 ft)

CA-180-3A CAT5 Crossover Cable for TSP-Link/Ethernet

KPCI-488LPA IEEE-488 Interface for PCI Bus

KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter

USB-B-1 USB Cable, Type A to Type B, 1m (3.3 ft)

TRIGGERING AND CONTROL

2450-TLINK DB-9 to Trigger Link Connector Adapter.

8501-1 Trigger Link Cable, DIN-to-DIN, 1m (3.3 ft)

8501-2 Trigger Link Cable, DIN-to-DIN, 2m (6.6 ft)

RACK MOUNT KITS

4299-8 Single Fixed Rack Mount Kit

4299-9 Dual Fixed Rack Mount Kit

4299-10 Dual Fixed Rack Mount Kit. Mount one 2460

and one Series 26xxB

4299-11 Dual Fixed Rack Mount Kit. Mount one 2460

and one Series 2400, Series 2000, etc.

2450-BenchKit Ears and Handle for 2460-NFP-RACK and

2460-RACK models

SERVICES AVAILABLE

2460-3Y-EW 1 Year Factory Warranty extended to 3 years

from date of shipment

2460-5Y-EW 1 Year Factory Warranty extended to 5 years

from date of shipment

C/2460-3Y-17025 KeithleyCare

3 Year ISO 17025 Calibration Plan

C/2460-3Y-DATA KeithleyCare 3 Year Calibration w/Data Plan

C/2460-3Y-STD KeithleyCare 3 Year Std. Calibration Plan

C/2460-5Y-17025 KeithleyCare 5 Year ISO 17025 Calibration Plan

C/2460-5Y-DATA KeithleyCare 5 Year Calibration w/Data Plan

C/2460-5Y-STD KeithleyCare 5 Year Std. Calibration Plan

C/NEW DATA Calibration Data for New Units

C/NEW DATA ISO ISO-17025 Calibration Data for New Units

Model 2460 specifications