Datasheet

Datasheet
TEK.COM10
Timing
Timer Free-running 47-bit counter with 1 MHz clock input. Reset each time instrument power is turned on. If the
instrument is not turned off, the timer is automatically reset to zero (0) every four years.
Timestamp TIMER value is automatically saved when each measurement is triggered
Resolution 1 µs
Timestamp Accuracy ±100 ppm
General Specifications
Ethernet RJ-45 connector, LXI version 1.4 Core 2011, 10/100BaseT, Auto-MDIX
LXI compliance LXI version 1.4 Core 2011
Expansion interface The TSP-Link® expansion interface allows TSP-enabled instruments to trigger and communicate with
each other.
Cable Type: Category 5e or higher LAN crossover cable.
9.84 ft (3 m) maximum between each TSP-enabled instrument.
USB Control USB 2.0 Device: USB-TMC488 protocol
USB File System USB 2.0 Host: Mass storage class device
Power Supply 100 VAC to 240 VAC, 50 Hz or 60 Hz (auto sensing), 425 VA maximum
Cooling Forced air; front and side intakes and rear exhaust
Warranty 1 year
EMC Conforms to European Union EMC Directive
Safety NRTL Listed to UL61010-1, and CSA C22.2 No 61010-1. Conforms with European Union Low Voltage
Directive.
Environment For indoor use only
Altitude: Maximum 6562 ft (2000 m) above sea level
Operating: 0°C to 50°C, 70% relative humidity up to 35°C. Derate 3% relative humidity/°C, 35°C to 50°C
Storage: –25°C to 65°C
Dimensions Rack Mount: 1.7 in. high × 19 in. wide × 26.8 in. deep (44 mm × 483 mm × 680 mm)
Weight 13.6 kg (30 lb.)