Datasheet

1.888.KEITHLEY (U.S. only)
www.keithley.com
15
SWITCHING AND CONTROL
A GREATER MEASURE OF CONFIDENCE
• 6 row by 16 column matrix
(2-pole)
• Analog backplane connection
relays provide easy column
expansion
• 300V, 1A switched or 2A carry
signal capacity; 60W, 125VA
• Screw terminal connections
provided on removable 3730-ST
accessory
• 2µV and 100pA offsets
• Relay closures stored in
onboard memory
• Latching electromechanical
relays
The Model 3730 is a two-pole, 6 row by 16 column matrix card. It can connect up to six differential
instrument channels to any combination of 16 DUTs (devices under test). Any row can be connected
to the Series 3700A mainframe backplane by using the analog backplane connection relays. This
allows for easy matrix column expansion. A matrix of up to 6 rows by 96 columns can be supported
within a single Model 3706A mainframe (with six Model 3730 cards).
The Model 3730 uses two 50-pin male D-sub connectors for signal connections. For screw terminal
connections, use the detachable Model 3730-ST accessory.
Ordering Information
3730 6×16, High Density,
Matrix Card
ACCESSORIES AVAILABLE
3721-MTC-1.5 50 Pin D-sub Female to Male Cable, 1.5m (5 ft.)
3721-MTC-3 50 Pin D-sub Female to Male Cable, 3m (10 ft.)
3730-ST Screw Terminal Block
3790-KIT50-R 50 Pin Female D-sub Connector Kit (contains
2 female D-sub connectors and 100 solder-cup
contacts)
3730
6×16, High Density, Matrix Card
96 two-pole crosspoints with column expansion relays
SERVICES AVAILABLE
3730-3Y-EW-STD 1-year factory warranty extended to 3 years
from date of shipment
3730-5Y-EW-STD 1-year factory warranty extended to 5 years
from date of shipment
C/3730-3Y-STD 3 (Z540-1 compliant) calibrations within 3 years
of purchase*
*Not available in all countries
High density 6×16 matrix card High density 6×16 matrix card