Datasheet

ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Tektronix Company
Test Leads and Probes
Item shipped may
vary from model
pictured here.
Model 1754 Universal Test Lead Kit: 10-piece
test lead kit with interchangeable plug-in acces-
sories. Kit includes: 1 set of test leads, 91.4cm
(36 in), 1 red and black; 2 spade lugs, 2 standard
banana plugs, 2 hooks, and 2 min ia ture alligator
clips with boots.
For use with: All DMMs, Series 2400
SourceMeter SMU Instruments
Model 2187-4 Low Thermal Test Lead Kit:
Includes an input cable with banana termina-
tions, banana extensions, sprung-hook clips,
alligator clips, needle probes, and spade lugs
to connect the Model 2182A to virtually any
DUT. The kit is also used to connect the Model
2182A directly to the Model 622X guard to
improve response time for pulsed measure-
ments or to reduce errors when measuring high
impedance devices.
For use with: 2182A, 6220, 6221, 6220/2182A,
6221/2182A
Model 2600-BAN: 1m (3.3 ft) banana test
leads/adapter cable for a single Series 2600B
SourceMeter channel (two needed for use with
Model 2602B and 2612B). Provides safety banana
connections to Hi, Sense Hi, Lo, Sense Lo,
and guard.
For use with: 2601B, 2602B, 2611B, 2612B
Model 2260-008: Test lead set with lugs,
10AWG, 122m (48 in), red/blue wire pair with
#10 terminal lugs on each end.
For use with: Series 2260B
Model 2260B-EXTERM: Extended Terminal
Test Leads, 0.7m (28 in.), and terminal box to
bring outputs to the front of the instrument or
another location. Magnetic base attaches to side
of the instrument.
For use with: Series 2260B
Model 3706-BAN: 1.4m (4.6 ft) banana test
leads/adapter cable for Model 3706A mainframe
with high performance multimeter option.
Provides direct connection to high performance
multimeter utilizing rear panel backplane con-
nector. Safety banana connections to HI, LO,
Sense HI, Sense LO, and AMP.
For use with: Series 3700A mainframes
Model 3706-TLK Test Lead Kit: Includes 3706-
BAN banana test leads/adapter cable and plug-
in test lead accessories. Test lead accessories
include: 4 spring hook probes, 2 needle test
probes, 4 safety plug adapters, and carrying case.
For use with: Series 3700A mainframes
Model 5804 Test Lead Set: Designed to be used
with Keithley instruments that measure
4-terminal resistance. Contains: 2 test leads,
0.9m (36 in), red and black; 2 test clips, red and
black; 2 plunger clip adapters, red and black; 2
alligator clips with boots (accept standard test
probe tip); 2 alligator clips with boots (barrels
accept standard banana plugs).
For use with: Series 2400 SourceMeter
®
SMU
Instruments, 2750, DMMs
Item shipped may vary
from model pictured here.
Technical information: Source Measurement Unit (SMU) Instruments
Test leads and probes