User manual

Model 6485 and 6487 User’s Manual Getting Started 1-11
Model 6485 rear panel summary
The rear panel of the Model 6485 is shown in Figure 1-2.
Figure 1-2
Model 6485 rear panel
1INPUT
This standard female BNC connector is used to connect the signal to be measured to the input of the
Model 6485. Mates to a BNC cable.
2CHASSIS
This screw terminal is used to connect COMMON to CHASSIS ground via the ground link connector.
3COMMON
This standard banana connector can be used as input LO or as the common for the ANALOG OUT.
Also can be used as a ground link.
4 ANALOG OUT
This standard banana connector provides a scaled, inverting output (inverting 2V full scale on all
ranges).
120
FUSE LINE
630mA
LINE RATING
50, 60Hz
30 VA
T
(SB)
100 VAC
120 VAC
315mAT
(SB)
220 VAC
240 VAC
!
INPUT
(CHANGE IEEE ADDRESS
WITH FRONT PANEL MENU)
IEEE-488
CAT I
TRIGGER LINK
RS-232
MADE IN
U. S. A.
220V PK
ANALOG OUT
13
8
4
567
2
120
FUSE LINE
400mA
LINE RATING
50, 60Hz
30 VA
T
(SB)
100 VAC
120 VAC
200mAT
(SB)
220 VAC
240 VAC
!
INPUT
(CHANGE IEEE ADDRESS
WITH FRONT PANEL MENU)
IEEE-488
CAT I
TRIGGER LINK RS-232
MADE IN
U. S.A.
220V PK
ANALOG OUT
13
8
4
567
2