Datasheet

ManualsBrandsKEITHLEY ManualsTest & MeasurementBench multimeter digital 7.5 Digit Graphical Sampling Multimeter Display (counts): 7500

DIGITAL MULTIMETERS & SYSTEMS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY

(U.S. only)

A Tektronix Company

The Model DMM7510 combines all the advantages

of a precision digital multimeter, a graphical

touchscreen display, and a high speed, high

resolution digitizer to create an industry first:

a graphical sampling multimeter. The digitizer

gives the Model DMM7510 unprecedented signal

analysis flexibility; the five-inch capacitive touch-

screen display makes it easy to observe, interact

with, and explore measurements with “pinch

and zoom” simplicity. This combination of high

performance and high ease of use offers unparal-

leled insight into your test results.

Capture Waveforms with the

Built-in 1MS/sec Digitizer

Capturing and displaying waveforms and tran-

sient events just got easier with the DMM7510’s

voltage or current digitizing function. The built-in 1MS/sec, 18-bit digitizer makes it possible to

acquire waveforms without the need to use a separate instrument. The digitizing functions employ

the same ranges that the DC voltage and current functions use to deliver exceptional dynamic mea-

surement range. In addition, the voltage digitizing function uses the same DC voltage input imped-

ance (10GΩ or 10MΩ) levels to reduce loading significantly on the DUT.

• Precision multimeter with 3½-

to 7½-digit resolution

• 14 PPM basic one-year DCV

accuracy

• 100mV, 1Ω, and 10µA ranges

offer the sensitivity needed for

measuring low level signals

• Make accurate low resistance

measurements with offset

compensated ohms, four-wire,

and dry circuit functions

• Capture and display waveforms

or transients with 1MS/sec

digitizer

• Large internal memory buffer;

store over 11 million readings in

standard mode or 27.5 million

in compact mode

• Auto-calibration feature

improves accuracy and stability

by minimizing temperature and

time drift

• Display more with five-inch,

high resolution touchscreen

interface

• Readings and screen images

can be saved quickly via the

front panel USB memory port

• Multiple connectivity options:

GPIB, USB, and LXI-compliant

LAN interfaces

• Two-year specifications allow

for longer calibration cycles

DMM7510

7½-Digit Graphical Sampling Multimeter

The high speed digitizing function allows

capturing and displaying voltage and

current waveforms.

Advanced triggering options make it possi-

ble to capture a signal at precisely the right

point.

The built-in graphing utility supports displaying and comparing measurements

or waveforms from up to four reading buffers at once.

Graphical sampling DMM

Summary of content (18 pages)

PAGE 1
The Model DMM7510 combines all the advantages of a precision digital multimeter, a graphical touchscreen display, and a high speed, high resolution digitizer to create an industry first: a graphical sampling multimeter. The digitizer gives the Model DMM7510 unprecedented signal analysis flexibility; the five-inch capacitive touchscreen display makes it easy to observe, interact with, and explore measurements with “pinch and zoom” simplicity.
PAGE 2
DIGITAL MULTIMETERS & SYSTEMS DMM7510 7½-Digit Graphical Sampling Multimeter DMM7510-NFP 7½-Digit Graphical Sampling Multimeter, with No Front Panel DMM7510-RACK 7½-Digit Graphical Sampling Multimeter, with No Handle DMM7510-NFP-RACK 7½-Digit Graphical Sampling Multimeter, with No Front Panel and No Handle Accessories Supplied 1756 Test Leads USB-B-1 USB Cable, Type A to Type B, 1m (3.
PAGE 3
7½-Digit Graphical Sampling Multimeter DMM7510 1f DC Voltage AC Voltage DC Current AC Current Resistance (2-wire) Resistance (4-wire) Dry Circuit Resistance Capacitance Period Frequency 1p 1n 1µ 1m 1 1k 10nV 100nV 1pA 1G 10.1A 10.1A 1nA 1µΩ 100nΩ 1µΩ 1.2GΩ 1.2GΩ 2.4kΩ 0.1pF 1.2mF 2µs Digitize Voltage Digitize Current 1M 1010V 707VRMS 330ms 3Hz 500kHz 1µV 1010V 0.1nA 10.
PAGE 4
7½-Digit Graphical Sampling Multimeter DIGITAL MULTIMETERS & SYSTEMS Graphical sampling DMM SERVICES AVAILABLE EXTENDED WARRANTIES DMM7510-EW 1 Year Factory Warranty Extended to 2 Years from Date of Shipment DMM7510-3Y-EW 1 Year Factory Warranty Extended to 3 Years from Date of Shipment DMM7510-5Y-EW 1 Year Factory Warranty Extended to 5 Years from Date of Shipment DMM7510-NFP-EW 1 Year Factory Warranty Extended to 2 Years from Date of Shipment DMM7510-NFP-3Y-EW 1 Year Factory Warranty Extended to 3 Year
PAGE 5
DMM7510 7½-Digit Graphical Sampling Multimeter Graphical sampling DMM Graphical sampling DMM Free Instrument Control Startup Software Keithley’s KickStart instrument control startup software lets you begin taking measurements in minutes.
PAGE 6
7½-Digit Graphical Sampling Multimeter Specification Conditions DC Voltage This document contains specifications and supplemental information for the Model DMM7510 7½-Digit Graphical Sampling Multimeter instrument. Specifications are the standards against which the Model DMM7510 is tested. Upon leaving the factory, the Model DMM7510 meets these specifications. Supplemental and typical values are nonwarranted, apply at 23°C (73°F), and are provided solely as useful information.
PAGE 7
½-Digit Graphical Sampling Multimeter DC VOLTAGE CHARACTERISTICS NORMAL MODE REJECTION ADC LINEARITY: 1.0 ppm of reading + 1.0 ppm of range. INPUT IMPEDANCE: 100mV to 10V Ranges: Selectable >10GΩ || <400pF (auto) or 10MΩ ±1% (10MΩ). 100V to 1000V Ranges: 10MΩ ±1%. INPUT BIAS CURRENT: <50pA at 23°C under the following conditions: Autozero off or input impedance 10MΩ. COMMON MODE CURRENT: <2.1µA peak-peak in 1MHz bandwidth. <100nA peak-peak in 1kHz bandwidth.
PAGE 8
7½-Digit Graphical Sampling Multimeter DMM7510 RESISTANCE OPEN CIRCUIT DC VOLTAGE 28 2-WIRE OHMS Range 20 1Ω 10 Ω 100 Ω, 1 kΩ 10 kΩ 100 kΩ, 1 MΩ 10 MΩ to 1 GΩ 2-wire – 9.2 V 14.0 V 9.5 V 12.7 V 6.9 V Offset compensation on 4-wire 9.5 V 9.5 V 14.3 V 0.0 V 0.0 V (100 kΩ range only) – • Applies to ± ppm of range. • Peak noise uncertainty is included in DC specifications for ≥1 PLC. • Add peak noise uncertainty to measurements for <1 PLC. EXAMPLES • 10kΩ at 0.
PAGE 9
7½-Digit Graphical Sampling Multimeter NPLC 5 1 0.2 37 0.2 0.06 0.006 0.0005 Digits 7½ 7½ 6½ 6½ 5½ 4½ 3½ 1Ω 10 9 30 (130) 60 (220) 70 (350) 130 (750) 520 (3550) 10 Ω 11 9 30 (120) 60 (230) 70 (350) 120 (830) 530 (3520) 100 Ω 6 7 30 (120) 50 (190) 50 (290) 110 (700) 530 (3380) 1 kΩ 5 7 30 (120) 50 (190) 50 (280) 100 (690) 500 (3370) DRY CIRCUIT RESISTANCE CHARACTERISTICS MAXIMUM 4-WIRE OHMS LEAD RESISTANCE: 0.5Ω per lead for 1Ω range. 10% of range per lead for 10Ω to 100Ω ranges.
PAGE 10
7½-Digit Graphical Sampling Multimeter DMM7510 NPLC Digits 5 7½ 1 7½ 0.2 6½ 44 6½ 0.2 0.06 5½ 0.006 4½ 0.0005 3½ 10 µA 0.15 0.4 0 (220) 120 (260) 130 (280) 130 (350) 260 (2110) 100 µA 0.14 0.13 0 (23) 12 (26) 12 (29) 14 (42) 30 (300) 1 mA 0.09 0.1 0.2 (3.4) 1.2 (3.8) 1.3 (5.6) 3 (20) 20 (150) 10 mA 0.1 0.1 0.2 (1.6) 0.3 (1.8) 0.4 (3.9) 2 (20) 20 (160) 100 mA 0.3 0.5 2 (10) 1.9 (9.8) 2 (14) 4 (30) 30 (190) 1A 0.3 0.5 2 (11) 2 (10) 2 (14) 4 (31) 30 (190) 3A 0.2 0.3 0.7 (4.6) 0.8 (5) 1.2 (7.
PAGE 11
7½-Digit Graphical Sampling Multimeter DMM7510 Resolution 100 mΩ Test Current 1 mA Open Circuit Voltage 14.0 V Accuracy ±(ppm of reading + ppm of range) 2 Year TCAL ±5°C 100 + 100 Temperature Coefficient 50 2.5 + 1 Accuracies specified for additional cable and stray capacitance properly zeroed with the Rel function. ACCURACY Range 51 1.0000 nF 10.000 nF 100.00 nF 1.0000 µF 10.000 µF 100.00 µF 1000.0 µF CONTINUITY CHARACTERISTICS CONTINUITY HIGH LIMIT: User-selectable; default 10Ω.
PAGE 12
7½-Digit Graphical Sampling Multimeter DMM7510 SIGNAL CHARACTERISTICS 61, 62, 63 Range 100.000 mV 1.00000 V 10.0000 V Analog Bandwidth (–3dB) 600 kHz 600 kHz 600 kHz Maximum Flatness Error 3 Hz to 20 kHz 64 0.015 dB 0.01 dB 0.01 dB THD 20 kHz Signal (–1dB FS) 65 0.04 % 0.03 % 0.01 % DC-coupled Settling Time (0.5%) 5 µs 6 µs 4 µs AC-coupled Filter FAST Settling Time (0.5%) 80 ms 80 ms 80 ms AC-coupled Filter SLOW Settling Time (0.5%) 2.3 s 2.5 s 2.
PAGE 13
7½-Digit Graphical Sampling Multimeter DMM7510 DC-COUPLED EFFECTIVE NUMBER OF BITS (ENOB), TYPICAL 70 Effective Number of Bits (ENOB), Digitize Voltage 18 Model DMM7510 condensed specifications 14 Bits 100mV 1V 12 10V 10 8 1k 2k 5k 10k 20k 50k 100k 200k Samples per Second Digitize Current DC ACCURACY 71 Accuracy ± (ppm of reading + ppm of range) Range 72 10.0000 µA 100.000 µA 1.00000 mA 10.0000 mA 100.000 mA 1.00000 A 3.00000 A 10.0000 A 75 Resolution 73 0.
PAGE 14
7½-Digit Graphical Sampling Multimeter DMM7510 ADDITIONAL NOISE UNCERTAINTY, TYPICAL 79 TOTAL HARMONIC DISTORTION (THD), TYPICAL 80 RMS Noise, Digitize Current Total Harmonic Distortion, Digitize Current 1000 -70 10µA 100µA 1mA 10mA 10µA 100µA 1mA -100 100mA, 1A 10 3A 10mA 100mA -110 10A 1 -90 -120 1k 2k 5k 1k 10k 20k 50k 100k 200k 500k 1M 2k 5k 10k 20k 50k 100k 200k Samples per Second Samples per Second EFFECTIVE NUMBER OF BITS (ENOB), TYPICAL 81 Effective Number of Bits (E
PAGE 15
7½-Digit Graphical Sampling Multimeter DMM7510 True RMS AC Voltage and AC Current Temperature Coefficient/°C (all ranges) Resolution 0.1 µV 1 µV 10 µV 100 µV 1 mV 3 Hz to 5 Hz 1.0 + 0.03 1.0 + 0.03 1.0 + 0.03 1.0 + 0.03 1.0 + 0.03 5 Hz to 10 Hz 0.30 + 0.03 0.30 + 0.03 0.30 + 0.03 0.30 + 0.03 0.30 + 0.03 10 Hz to 20 kHz 0.06 + 0.03 0.06 + 0.03 0.06 + 0.03 0.06 + 0.03 0.06 + 0.03 20 kHz to 50 kHz 0.14 + 0.05 0.14 + 0.05 0.14 + 0.05 0.14 + 0.05 0.14 + 0.05 50 kHz to 100 kHz 0.6 + 0.08 0.6 + 0.08 0.
PAGE 16
Model DMM7510 condensed specifications AC VOLTAGE CHARACTERISTICS AC CURRENT CHARACTERISTICS MEASUREMENT METHOD: AC-coupled, true RMS. INPUT IMPEDANCE: 1MΩ ± 2%|| <150pF. VOLT*HERTZ PRODUCT: <2.1 × 107 V*Hz verified; input frequency verified for <300kHz. MEASUREMENT METHOD: AC-coupled, true RMS. 1 mA <16 mV 10 mA <20 mV 100 mA <0.2 V 1A <0.4 V 3A <1.3 V 10 A 87 <0.65 V 0.006 0.006 0.12 0.
PAGE 17
Triggering MODE: 3½-digit, autozero off, 0.0005 PLC, excludes measurement time. Time includes function change from DC voltage or 2-wire ohms to listed function. TIME BASE ACCURACY: 25ppm. TRIGGER SOURCE: Analog DCV, DCI, or any system trigger. TRIGGER COUPLING: DC or AC (DCV function only). INPUT TRIGGER LATENCY 96, 97, 98: <225ns. INPUT TRIGGER JITTER 96, 97: <50ns. SAMPLE PERIOD JITTER 96, 97: <1ns.
PAGE 18
DMM7510 7½-Digit Graphical Sampling Multimeter DIGITAL MULTIMETERS & SYSTEMS SPECIFICATION CONDITIONS: This document contains specifications and supplemental information for the Model DMM7510 Precision Sampling Digital Multimeter instrument. Specifications are the standards against which the Model DMM7510 is tested. Upon leaving the factory, the Model DMM7510 meets these specifications.