Installation & Assembly

ManualsBrandsKelly Clarkson Home ManualsCeiling LightsJacqeuline 9 - Light Single Globe LED Pendant with Crystal Accents

INSTALLATION:

LED PENDANT

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

Phillips

Screwdriver

Wire Cutters

Pliers Wrench

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH

A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

Wiring supplies

as required by

local electrical

code

dimmable

This LED light is suitable to be dimmed by

LEVITON# 742-6672-HLW, 722-6674-PDW MAX 150 W,

Lutron # SCL-153PH-WH MAX 150 W.

The MAX rated wattage of this model is 15.5 W

1. Remove one screw to remove the mounting bracket from the fixture.

2. Feed power cords from the electrical box through the center hole of the

mounting bracket.

Mount the mounting bracket to electrical box using electrical

box screws (not included).

3. Adjusting the length of flexible cord. For safety, do not release the knot

inside canopy.

4. Connect the ground wires from your fixture to the ground wire or ground

screw in the electrical outlet box. Connect the black wire from the fixture to the

black wire in the electrical box and connect the white wire from the fixture to the

white wire in the electrical box.

5. Once connections of wires are completed, carefully tuck wires and wire nuts

into the electrical box making sure no bare wire (on the black and white) is visible

at the wire nuts.

6. Position fixture over the mounting bracket. Line up the screw in the bracket to

the "7" hole on the fixture. Slide fixture to secure in place. Insert remaining screw.

Tighten both screws to secure.

Electrical

Box

Electrical Box

Screws

(not included)

Fixture

Ground wire

Red

Black

Mounting

Bracket

White

(Neutral)

Black

(Hot)

House Supply

Ground Wire

Fixture

Ground wire

Screrw

Summary of content (2 pages)

PAGE 1
LED PENDANT TOOLS AND MATERIALS REQUIRED: Phillips Screwdriver Wire Cutters Pliers Wrench Wiring supplies as required by local electrical code SAFETY PRECAUTIONS: 1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 3.
PAGE 2
SUSPENSION AU DEL ! INSTRUCTIONS CONCERNANT LE RISQUE D’INCENDIES OU LES DOMMAGES CORPORELS LISEZ TOUTES LES INSTRUCTIONS INSTRUCTIONS DE SÛRETÉ IMPORTANTES GARDEZ CES INSTRUCTIONS OUTILS ET MATERIAUX REQUIS: Tournevis A Phillips Pinces Fournitures électriques telles Coupeur De Fils que prescrites par les normes locales Clef MISE EN GARDE: 1. FERMER LE COURANT AU DISJONCTEUR AVANT DE DÉBUTER L’INSTALLATION DE LA FIXTURE. 2.