User's Manual & Safety Instructions

User’s Manual & Safety Instructions
Direction for Use
Your fireplace is for decorative purpose only and not suitable for continuous operation. Do not use the
fire to heat or boil water or as a cooking appliance. Do not put charcoal, paper, wood or other
combustible objects into the fire.
Step 1: Remove the extinguish cover from burner. Make sure the burner is clean and free of dirt or packing
debris. Fill the burner with the approved bio ethanol; watch carefully till you reach under the level of the
“Max” line. Do not overfill or spill. The burner should be no more than 2/3 full.
CAUTION:
CAUTION:
Fuel will burn low at first. Please allow 10-15 minutes to reach the optimum temperature and flame height.
Avoid drafts for long burning time.
Please ensure your pebbles or logos are not covering the opening in case of accidental spillage.
Any spilled ethanol must be immediately removed with an absorbent tissue and cleaned with water to prevent
ignition outside the burner reservoir.
Fuel must be kept in safe distance (min. 1 m/40 inch) to the fireplace. Do not place fuel in front of the
fireplace.
Step 2: Use a long match or a long-end lighter to ignite. When igniting, keep a safe distance at arm’s length.