Assembly Instructions

(6) 3” x 5/16” bolts (18) 1¼” washers

(1) Headboard*

(2) wings* (2) metal legs

(4) ⅝” x 5/16” bolts (4) 1” x ¼” bolts (4) ¼” nuts

You will need:

• phillips screwdriver

• at head screwdriver

• pliers

*images might vary from actual product

headboard components

headboard & side rails hardware

*Open all hardware packets

in both packages before

starting assembly.

Headboard

LIMITED WARRANTY

We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect

isbrought to our attention, we will repair or replace it at our option at no charge to the customer (inculdes parts and

labor, nottransportation costs). Fabric wearability for upholstered furniture is not covered by the warranty. Vacuum for regular

cleaning.

PLEASE DISPOSE OF PLASTIC BAG(S) AND CARTON(S) RESPONSIBLY.

Assembly Instructions

PAGE 1
Headboa rd Assembly Instructions headboard components (1) Headboard* *images might vary from actual product (2) wings* (2) metal legs headboard & side rails hardware (6) 3” x 5/16” bolts You will need: • phillips screwdriver • flat head screwdriver • pliers (4) ⅝” x 5/16” bolts (4) 1” x ¼” bolts (18) 1¼” washers (4) ¼” nuts *Open all hardware packets in both packages before starting assembly.
PAGE 2
Step 1 1 Attach each wing to headboard using: 1. (1) 3” x 5/16” bolt and (1) 1¼” washer 2. (1) 3” x 5/16” bolts and (1) 1¼” washer 2 3. (1) 3” x 5/16” bolts and (1) 1¼” washer 4. Repeat process for the other wing. 3 Step 2 Insert metal legs through the holes in the headboard. Make sure that you place the correct leg facing “Out.” Attach each metal leg to the headboard using (2) ⅝” x 5/16” bolts and (2) 1¼” washers for each leg.