Maintenance Handbook
Table Of Contents
- 1 Contents
- 2 Health and Safety Warnings
- 3 Overview
- 4 Switch ON, OFF & Emergency Stop
- 5 Anti-Condensation Heater (ACH)
- 6 Operation Overview
- 7 Local Control
- 8 Remote Control
- 9 Planned Maintenance
- 10 Contact Details
- 11 Abbreviations
- 12 Index
SBS-800 Series Operator & Planned Maintenance Handbook
Chapter 7: Local Control
KH-1601-2 Issue 6
Page 43 of 80
7.2 Menus
There are four menus that can be selected from the LCD display; the menus vary depending on
system settings.
Each menu is detailed in the following sections:
Menu
Menu availability
Description
Local
control
Remote
Control
Control
menu
This menu contains the operator and maintainer adjustable
parameters for the system such as range mode, Mute
ON/OFF, sea and rain filters etc.
Status
menu
The current status of the system can be viewed but not
adjusted. For example signal status, transceiver run-time and
temperature figures etc.
Setup
menu
The Setup menu is not available or required for ‘normal’
system operation. The menu is used by the system
maintainer or commissioning engineer to configure the
system.
7.2.1 Navigating Within Menus
Within all menu structures it is possible to move back and forward between menus using the left
and right buttons i.e.
Range
mode
TX
power
TX
frequency
Exit