Maintenance Handbook

SBS-800 Series Operator & Planned Maintenance Handbook
Chapter 7: Local Control
KH-1601-2 Issue 6
Page 50 of 80
7.2.3.5 NTP Time
Status Menu
Status
Radar
Control
Status
SharpEye
Network
NTP
Status
Comms
status
MISM
status
Software
Info
Exit
The configuration of the NTP time status can be viewed but not adjusted.
Time Stamp
ON/OFF
IP Address
Displays the NTP server IP address set during the commissioning of the
system
SRC Port
Displays the NTP (source) port set during the commissioning of the
system
Exit
Exit the NTP status menu.
7.2.3.6 COMMS Status
Status Menu
Status
Radar
Control
Status
SharpEye
Network
NTP
Status
Comms
status
MISM
status
Software
Info
Exit
By scrolling through the COMMS STATUS menus, the following system conditions can be viewed but
cannot be adjusted.
In the following Active/Inactive is defined as:
Active: A correctly configured and connected system is switched ON and sending serial
command or status request messages.
Inactive: A correctly configured and connected system may be switched OFF, is not sending
serial CANBus messages or in some systems no second transceiver is fitted
SharpEye
SharpEye™ network is Active or Inactive
TE display
Track Extractor (TE) is Active or Inactive on the remote serial port.
Service display
Optional Service display is Active or Inactive on the local serial port.
Network CTRL
Network Active or Inactive on the remote LAN port
Exit
Exits the Comms status menu
.