Maintenance Handbook

SBS-800 Series Operator & Planned Maintenance Handbook
Chapter 7: Local Control
KH-1601-2 Issue 6
Page 51 of 80
7.2.3.7 MISM Status
Status Menu
Status
Radar
Control
Status
SharpEye
Network
NTP
Status
Comms
status
MISM
status
Software
Info
Exit
By scrolling through the MISM status (Modular Interface System Module) menus, the status of each of
the 12 slots on the backplane can be viewed.
The results will vary depending on the cards fitted within the RDU. The following is a typical result:
A1 Empty
Empty
B1 Empty
Empty
A2 Empty
Empty
B2 Empty
Empty
A3 I/O Mk2
POSSIBLE MISM CONDITIONS
EMPTY: A PCA is not fitted in the slot
ERROR: The PCA is in the wrong slot for the RDU variant
MISSING: The PCA required by the software is not present i.e. is
not loaded
PRESENT: The correct PCA is fitted
ERROR MESSAGE: 0020 if a module is fitted in the wrong slot or is
missing, the RDU will not function further than reporting the error.
B3 I/O Mk2
A4 I/O Mk2
B4 Signals
A5
Empty
B5 Comms
POSSIBLE MISM CONDITIONS
EMPTY: A PCA is not fitted in the slot
ERROR: The PCA is in the wrong slot for the RDU variant
MISSING: The PCA required by the software is not present i.e. is
not loaded
PRESENT: The correct PCA is fitted
ERROR MESSAGE: 0020 if a module is fitted in the wrong slot or is
missing, the RDU will not function further than reporting the error.
A6 MISM 5
APP OK : Temp ºC
B6
Empty
MISB
Loaded
PSU
OK
Exit
Exits the MISM status menu