Maintenance Handbook
Table Of Contents
- 1 Contents
- 2 Health and Safety Warnings
- 3 Overview
- 4 Switch ON, OFF & Emergency Stop
- 5 Anti-Condensation Heater (ACH)
- 6 Operation Overview
- 7 Local Control
- 8 Remote Control
- 9 Planned Maintenance
- 10 Contact Details
- 11 Abbreviations
- 12 Index
SBS-800 Series Operator & Planned Maintenance Handbook
Chapter 7: Local Control
KH-1601-2 Issue 6
Page 56 of 80
7.2.4.6 Int. Rejection
Control Menu
Range
Mode
Tx
Power
Tx Freq.
Mute
Rain
Sea
Int.
Rejection
Sweep
RPM
Exit
THIS MENU IS NOT ENABLED IN SBS-800 SYSTEMS.
This menu is not enabled as the system uses Doppler principles automatically. This menu will have
no function in this system.
7.2.4.7 Sweep
Control Menu
Range
Mode
Tx
Power
Tx Freq.
Mute
Rain
Sea
Int.
Rejection
Sweep
RPM
Exit
Sweep sets the signal sweep direction of the SharpEye
TM
transceiver RF pulses during medium and
long pulse transmissions only.
Sweep FORWARD: Frequency modulation is lower to higher value i.e. -10MHz to +10MHz. This
is the default setting.
Sweep REVERSE: This reverses the sequence of the frequency modulation within the RF pulses
and may assist in the reduction of in-band interference from other radars in
the same locality thus potentially improving the quality of returns e.g. +10MHz
to -10MHz.