COMMERCIAL FREEZER/REFRIGERATOR TABLE OF CONTENTS Product Registration .............................................................. Important Safety Instructions ................................................ First Steps .................................................................................. Appliance Start=up ................................................................. Features ................................................................................ Care and Cleaning ..........
Product Important Registration Safety Instructions Read all instructions this appliance, before using For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this unit or any other appliance. Read product Read and Save These Instructions These instructions include information which is intended to assure the operator of correct installation, operation and service.
Important Safety Instructions Electrical Information Other Precautions These guidelines must be followed to ensure that safety mechanisms in the design of this • NEVER unplug the appliance by pulling on the power cord. Always grip app!iance will operate proper! y............................................... the plug firmly and pull straight out from the receptacle. • To avoid electrical shock, unplug the appliance before cleaning. Avoid fire hazard or electric shock.
First Steps Tools Needed Front Fixed Caster Installation The following tools are required to assemble and install the casters to the unit: Locate and align fixed caster (with brake lever facing front of unit - see Figure 3) over the same mounting holes from bracket in Figure 1 using 6 hex screws (3 for each caster). Secure the screws snug using a 3/8" open end wrench. Repeat this procedure for opposite corner.
First Steps i: toe plate screws were screwed into. :: I¸ i: ¸ i¸ ® -- (2) C bolts lock nut _,/ Swivel caster ; i::: Install caster x (2_He× Head Figure 5 4. 5, ,-.,_ screws (2)Screws.............................. _ 4 Repeat the same procedure for the opposite rear corner. To&_Plate With the help of an assistant, carefully upright the unit. Reassemble the rear access guard with screws. _a_i_ 3. Holding door securely closed; remove 2 hex head screws from the top hinge. 4.
First Steps Appliance the cabinet and door; secure with 2 hex head screws. Start=up Once the appliance has been located in its permanent location and the proper power and grounding has been provided, the following items must be checked or completed: i0. Install plugs in each of the hinge holes on opposite side on the cabinet. Cool Down Period ii. Re-install toe plate with 2 screws. For safe food storage, allow 24 hours for the appliance to cool down completely before loading with food.
Features • NSF-certified top-mounted evaporator 2-1/2" urethane foam cabinet insulation • Torsion-spring door closer Heavy-duty fixed and swivel casters 17-watt fluorescent lamp Stainless steel evaporator housing Removable stainless steel drain cover Adjustable temperature NSF-certified control Adjustable Control The adjustable cold control is located on the top left panel inside the unit.
Features Care and Ciearlirlg Turning the light off, when not in use, will save energy. However, frequent ON-OFF cycling will reduce the lamp life. Cleaning the Interior Be sure to turn the temperature control to "OFF" and unplug the electrical cord. Wash the inside surface of the storage area with a solution of 1 tbsp. (12 g) of baking soda in 1 qt. (1 I) warm water. Rinse thoroughly with clean, warm water and wipe dry. The procedure can also be used for cleaning the door gasket.
Care and Cleaning Power Hoving DO NOT open the appliance lid unnecessarily the appliance is off for several hours. When moving the appliance, follow these guidelines to prevent damage: Remove foods, then defrost, and clean the appliance. Secure all loose items such as base panel, baskets, and shelves by taping them securely in place to prevent damage. ][n the moving vehicle, secure appliance in an upright position to prevent movement. Also, protect outside of appliance with a blanket or similar item.
Before You Caii TROU BLESHOO_NG GUIDE PROBLEM APPLIANCE Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. CAUSE CORRECTION OPERATION Appliance does not run. Appliance runs too much or too long. • Appliance is plugged into a circuit that has a ground fault interrupt. • Temperature control is in the "OFF" position.
Before You Cali PROBLEM CAUSE CORRECTION Louder sound levels whenever appliance is on. • Modern appliances have increased storage capacity and more stable temperatures. They require heaw-duty compressors. • This is normal. When the surrounding noise level is low, you may hear the compressor running while it cools the interior. Louder sound levels when compressor comes on. • Appliance operates at higher pressures during the start of the ON cycle, • This is normal.
IMPORTANT SAFETY NOTICE The information provided herein is designed to assist qualified repair personnel only. Untrained persons should not attempt to make repairs due to the possibility of electrical shock. Disconnect the power cord before servicing.
Your appliance is covered by a three (3) year limited warranty. For three (3) years from your original date of purchase, Electrolux will pay all costs, except as set forth below, for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
