Users Manual

ManualsBrandsKELVINRF ManualsPOS EquipmentWireless Paging System

Wireless Paging System

1. Functional Diagram

2. Parameter

Host

Pager

Input Power

DC12V/2A

Battery

Li-ion 3.7V 300mAh

Frequency

433.92MHz

Frequency

433.92MHz

Transmit Power

26dBm

Standby Current

<12mA

Standby Power

<120mW

Standby Duration

10h

Modulation Type

FSK

Sensitivity

-115dBm

Max Capacity

998 pagers

Max Distance

800m-1000m

Dimensions

190*130*40mm

Prompt Mode

Vibration/Buzzer/Flashing

Output

DC5V/2A*2

Prompt Time

30s

3. Instructions for Use

A. Before using

Wiring: Host connects to power source via adapter. Charging base connects to host via Type-C cable.

The pager is placed on the charging base. The charging indicator on the pager lights up to indicate

normal status.

Charging Indicator Information:

Pager

Flashing

Charging

Always On

Full Charged

B. Operating Instruction

CALL mode is the default mode. Continuously press Delete button (←) to return Call Mode while in other

mode. C--- is displayed in CALL mode.

Input the number and press CALL button to call the corresponding pager.

Summary of content (3 pages)

PAGE 1
Wireless Paging System 1. Functional Diagram 2. Parameter Host Pager Input Power DC12V/2A Battery Li-ion 3.7V 300mAh Frequency 433.92MHz Frequency 433.92MHz Transmit Power 26dBm Standby Current <12mA Standby Power <120mW Standby Duration 10h Modulation Type FSK Sensitivity -115dBm Max Capacity 998 pagers Max Distance 800m-1000m Dimensions 190*130*40mm Prompt Mode Vibration/Buzzer/Flashing Output DC5V/2A*2 Prompt Time 30s 3. Instructions for Use A.
PAGE 2
C. Mute mode Press MUTE and 999 (S999 displayed) then press CALL, all charging pagers change to MUTE mode. Press MUTE and 000 (S000 displayed) then press CALL, all charging pagers change to normal mode. In MUTE mode, all pagers only vibrate and flash while being called. Continuously press DELETE button (←) to return CALL mode. (C--- displayed) D. Call History Press ∨/∧ button to page up/down. When you find a number you want to call again, you can directly press the CALL.
PAGE 3
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.