Datasheet
11© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4071_A767 • 2/7/2018
Surface Mount Conductive Polymer Aluminum Solid Electrolytic Capacitors
A767 105°C
Re-Flow Soldering
The soldering conditions should be within the specied conditions below:
• Do not dip the capacitors body into the melted solder.
• Flux should only be applied to the capacitors' terminals.
• Vapour heat transfer systems are not recommended. The system should be thermal, such as infra-red radiation or hot
blast.
• Observe the soldering conditions as shown below.
• Do not exceed these limits and avoid repeated reowing.
Time
period
T1 T2
T3
Φ < 8 Φ ≥ 8
Temperature (ºC) ≤ 200 ≤ 230 ≤ 260 ≤ 240
Time (seconds) 60 – 180 ≤ 50 ≤ 40 ≤ 40
Maximum Temperature: ≤ 275 Times ≤ 2