Datasheet

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4079_ALA7D • 9/4/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
9
Snap-In Aluminum Electrolytic Capacitors – ALA7D, +85°C
Marking
KEMET Logo
Rated Capacitance,
Capacitance Tolerance
Rated Voltage (VDC)
Polarity Stripe (−)
Series, Capacitance
Code, Voltage Code
Climatic Category
Made in the
European Union
Date of Manufacture,
Batch Number
*Print shown is representative of the data included on the sleeve. Actual appearance can be continuous print style.
Construction
Detailed Cross Section
Margin
Termination Pin (−)
Rubber Seal
Rubber Seal
Insulating Sleeve
Laser Welded
Terminal Tabs
Termination Pin
Laser Welded
Terminal Tab
Aluminum Can
Insulating Sleeve
Insulating End Disc
Termination Pin (+)
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Paper Spacer Impregnated
with Electrolyte
(Third Layer)
Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
(Fourth Layer)
Cathode Aluminum Foil,
Etched (Second Layer)
Aluminum
Can
Safety
Vent
Anti-Vibration
Groove
Polarity
Stripe (−)