Datasheet

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4020_ALC10 • 2/13/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
2
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Performance Characteristics
Item Performance Characteristics
Capacitance Range 47 – 100,000 µF
Rated Voltage 35 – 600 VDC
Operating Temperature −40 to +85°C
Capacitance Tolerance ±20% at 100 Hz/+20°C
Operational Lifetime
D (mm)
Rated Voltage and Ripple
Current at +85°C (hours)
Rated Voltage at +85°C (hours)
25 10,000 16,000
30 13,000 21,000
35 15,000 24,000
40 – 50 18,000 29,000
End of Life Requirement ∆ C/C < ±10%, ESR < 2 x initial ESR value, IL < initial specied limit
Shelf Life 2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC
Leakage Current
I = 0.006 CV or 6,000 (µA, whichever is smaller)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Vibration Test Specications
Procedure Requirements
D ≤ 40 mm
0.75 mm displacement amplitude
or 10 g maximum acceleration.
Vibration applied for three
2-hour sessions at 10 – 500 Hz
(capacitor clamped by body).
No leakage of electrolyte
or other visible damage.
Deviations in capacitance from
initial measurements must not
exceed: ∆ C/C < 5%
D > 40 mm
0.35 mm displacement amplitude
or 5 g maximum acceleration.
Vibration applied for three
0.5-hour sessions at 10 – 55 Hz
(capacitor clamped by body).
Standards IEC 60384–4 long life grade 40/85/56
Surge Voltage
Condition
Voltage (VDC)
35 40 63 100 200 250 350 400 450 500 550 600
≤ 30s Surge followed by a no load
period of 330s, 1,000 cycles at +85°C
40.25 46 72.5 115 230 288 385 440 495 550 605 660
≤ 500 ms surge, 100 cycles at 20°C,
occurring randomly throughout the
life of the capacitor
350 400 500 520 550 600 620 670