Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsElectrolytic Capacitor, Snap-In 330uF 20% 450V

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Compact size

• Long life, up to 18,000 hours at +85°C (V

, I

applied)

• High ripple current

• High voltage

• Excellent surge voltage capability

• Optimized designs available upon request

Overview

The KEMET ALC10 snap-in capacitors covers a wide range

of case sizes and voltage ratings. The ALC10 is designed

for high voltage, it is up to 600 VDC, has high ripple current

applications and features surge voltage capability and very

long-life performance.

Applications

The KEMET ALC10 capacitors are ideally suited for

industrial and commercial applications demanding high

reliability and long life expectancy. Typical applications

include frequency converters, uninterruptible power supply

(UPS) systems and switch mode power supplies (SMPS).

Snap-In Aluminum Electrolytic Capacitors

ALC10, +85°C

Part Number System

ALC10 A 392 BB 040

Series Termination Capacitance Code (µF) Size Code Rated Voltage (VDC)

Snap-In

Aluminum

Electrolytic

See Termination Table First two digits

represent signicant

gures. Third digit

species number of

zeros.

See Dimension Table 035 = 35

040 = 40

063 = 63

100 = 100

200 = 200

250 = 250

350 = 350

400 = 400

450 = 450

500 = 500

550 = 550

600 = 600

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
Snap-In Aluminum Electrolytic Capacitors ALC10, +85°C Overview Applications The KEMET ALC10 snap-in capacitors covers a wide range of case sizes and voltage ratings. The ALC10 is designed for high voltage, it is up to 600 VDC, has high ripple current applications and features surge voltage capability and very long-life performance. The KEMET ALC10 capacitors are ideally suited for industrial and commercial applications demanding high reliability and long life expectancy.
PAGE 2
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Performance Characteristics Item Performance Characteristics Capacitance Range 47 – 100,000 µF Rated Voltage 35 – 600 VDC Operating Temperature −40 to +85°C Capacitance Tolerance ±20% at 100 Hz/+20°C D (mm) Rated Voltage and Ripple Current at +85°C (hours) Rated Voltage at +85°C (hours) 25 10,000 16,000 30 13,000 21,000 35 15,000 24,000 40 – 50 18,000 29,000 Operational Lifetime End of Life Requirement Shelf Life Leakage Curre
PAGE 3
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Test Method & Performance Endurance Life Test Conditions Performance Temperature +85°C Test Duration 2,000 hours Ripple Current Voltage Performance Rated ripple current in specified table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20°C: Capacitance Change Equivalent Series Resistance Leakage Current ≤ 160 V
PAGE 4
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Termination Tables Termination Code A D F C E 25 • • • 30 • • • 35 • • 40 • • G H • • • • • • • • 45 • • • • 50 • • • • Diameter (mm) Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. Termination Code Termination Style LL ±1 Standard Termination Option A 2 Pin 6.3 G (D ≥ 45) 5 Pin 6.
PAGE 5
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Termination Tables cont'd Style A/D SIDE VIEW PCB LAYOUT TERMINAL END VIEW L D 2 ±0.1 LL Style F SIDE VIEW D + SIDE VIEW TERMINAL END VIEW L 3.3 ±0.1 Ø2.5 Minimum + ve 4.75 ±0.1 10 ±0.1 Ø2 ±0.1 Typical - LL Style C/E PCB LAYOUT TERMINAL END VIEW L 10 ±0.1 PCB LAYOUT 4 Holes Ø2 ±0.1 on a Ø22.
PAGE 6
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however, the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product for specific data.
PAGE 7
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF = 1/λ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An estimation is also given at 40°C.
PAGE 8
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Table 1 – Ratings & Part Number Reference VDC Rated Capacitance 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 100 Hz 20°C (µF) 33000 56000 100000 3900 4700 5600 5600 6800 8200 10000 12000 12000 15000 18000 18000 22000 27000 33000 47000 82000 2200 2700 3300 3300 4700 5600 6800 6800 8200 8200 100
PAGE 9
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 100 Hz 20°C (µF) 560 680 820 820 1000 1000 1000 1200 1200 1500 1500 1800 2200 3300 4700 5600 8200 220 270 330 330 330 470 560 680 680 680 820
PAGE 10
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 100 Hz 20°C (µF) 1800 2700 3300 100 120 150 150 180 220 220 270 270 330 330 330 330 390 390 470 470 470 470 560 560 560 680 680 820 1000 1000
PAGE 11
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 600 600 600 600 600 100 Hz 20°C (µF) 820 1000 1000 1200 1500 1800 2200 56 68 82 82 100 100 120 150 180 180 180 220 220 270 270 330 330 390 390 470 560 680 680 10
PAGE 12
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 100 Hz 20°C (µF) 120 150 150 180 220 270 390 150 180 220 270 330 390 560 820 1000 1000 1200 VDC Rated Capacitance Size Code Case Size D x L (mm) CD CF DC DD DF DH DL EB EC ED EE EF EH EL EP FP KL KP 30 X 40 30 X 50 35 X 35 35 X 40 35 X 50 35 X 60 35 X 80 40 X 30 40 X 35 40 X 40 40 X 45 40 X 50 40 X 60
PAGE 13
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Mechanical Data Polarity and Reversed Voltage Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil.
PAGE 14
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Marking KEMET Logo Rated Capacitance, Capacitance Tolerance Rated Voltage (VDC) Series, Capacitance Code, Voltage Code Climatic Category Date of Manufacture, Batch Number Made in the European Union Polarity Stripe (−) Construction Detailed Cross Section Termination Pin Insulating End Disc Polarity Stripe (−) Aluminum Can with Safety Vent Rubber Seal Laser Welded Terminal Tab Margin Laser Welded Terminal Tabs Aluminum Can Insulating Sleeve
PAGE 15
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 16
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.