Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsElectrolytic Snap-In Capacitor 180uF 450VDC

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4081_ALC70 • 4/29/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Maximum capacitance capability in a smaller size

• Long life, up to 18,000 hours at +85°C (V

, I

applied)

• High ripple current

• Excellent surge voltage capability

• PET sleeve and Lexan disc are recognized to UL: QMTR2

(UL No. E358957)

• Optimized designs available upon request

Overview

The KEMET ALC70 High CV snap-in capacitors offer high

performance and reliability in a wide range of case sizes

and voltage ratings (up to 600 V), featuring high ripple

currents and long-life performance. Volumetric eciency

ensures the maximum capacitance capability in a

smaller size.

Applications

Typical applications for the ALC70 capacitor include

inverters, frequency converters, motor drives, motor control,

UPS systems, smoothing, energy storage, alternative energy,

charging stations, traction, demanding power supplies

(SMPS), welding, and HVAC.

Snap-In Aluminum Electrolytic Capacitors

ALC70, +85°C

Part Number System

ALC70 A 562 BB 040

Series Termination Capacitance Code (µF) Size Code Rated Voltage (VDC)

Snap-in type

Aluminum Electrolytic

See Termination Table First two digits

represent signicant

gures. Third digit

species number of

zeros.

See Dimension Table 040 = 40

063 = 63

100 = 100

200 = 200

250 = 250

350 = 350

400 = 400

450 = 450

500 = 500

550 = 550

600 = 600

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
Snap-In Aluminum Electrolytic Capacitors ALC70, +85°C Overview Applications The KEMET ALC70 High CV snap-in capacitors offer high performance and reliability in a wide range of case sizes and voltage ratings (up to 600 V), featuring high ripple currents and long-life performance. Volumetric efficiency ensures the maximum capacitance capability in a smaller size.
PAGE 2
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Performance Characteristics Item Performance Characteristics Capacitance Range 51 – 150,000 µF Rated Voltage 40 – 600 VDC Operating Temperature −40 to +85°C Storage Temperature −55 to +85°C Capacitance Tolerance ±20% at 100 Hz/+20°C D (mm) Rated Voltage and Ripple Current at +85°C (hours) Rated Voltage at +85°C (hours) 25 10,000 16,000 30 13,000 21,000 35 15,000 24,000 40 – 50 18,000 29,000 Operational Lifetime End of Life R
PAGE 3
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Test Method & Performance Endurance Life Test Conditions Performance Temperature +85°C Test Duration 2,000 hours Ripple Current Voltage Performance Rated ripple current in specified table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20°C: Capacitance Change Equivalent Series Resistance Leakage Current ≤ 160 V
PAGE 4
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Termination Tables Termination Code A D F • • • • • • • • • • • • C E G H • • • • • • • • • • • • Diameter (mm) 25 30 35 40 45 50 Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. Termination Code Termination Style LL ±1 Standard Termination Option A 2 Pin 6.3 G (D ≥ 45) 5 Pin 6.
PAGE 5
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Termination Tables cont'd Style A/D SIDE VIEW PCB LAYOUT TERMINAL END VIEW L D 2 ±0.1 LL Style F SIDE VIEW D SIDE VIEW TERMINAL END VIEW L 3.3 ±0.1 Ø2.5 Minimum + ve 4.75 ±0.1 10 ±0.1 Ø2 ±0.1 Typical - + LL Style C/E PCB LAYOUT TERMINAL END VIEW L 10 ±0.1 PCB LAYOUT 4 Holes Ø2 ±0.1 on a Ø22.
PAGE 6
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Shelf Life The capacitance, ESR, and impedance of a capacitor will not change significantly after extended storage periods; however, the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product series for specific data.
PAGE 7
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Table 1 – Ratings & Part Number Reference VDC Rated Capacitance 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 100 Hz 20°C (µF) 5,600 9,100 9,100 15,000 16,000 18,000 20,000 20,000 27,000 36,000 47,000 68,000 110,000 150,000 3,000 4,700 4,700 7,500 8,200 9,100 10,000 10,000 13,000 18,000 24
PAGE 8
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 100 Hz 20°C (µF) 680 820 820 910 1,000 1,300 1,800 2,400 3,300 5,600 6,800 160 240 270 390 470 470 560 560 750 1,100 1,300 2,000 3,300 3,900 150
PAGE 9
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC Rated Capacitance 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 600 600 600 600 600 600 600 600 600 600 600 600 600 600 100 Hz 20°C (µF) 2,700 91 130 130 220 240 270 300 300 430 560 750 1,000 1,600 2,200 75 120 120 200 220 240 270 270 360 510 620 910 1,300 1,800 51 82 82 130 150 160 180 180 240 330 430 620 1,000 1,300 VDC Rat
PAGE 10
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment.
PAGE 11
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Marking KEMET Logo Polarity Stripe (−) Rated Capacitance, Capacitance Tolerance Rated Voltage (VDC) Series, Capacitance Code, Voltage Code Climatic Category Date of Manufacture, Batch Number Made in the European Union *Print shown is representative of the data included on the sleeve. Actual appearance can be continuous print style.
PAGE 12
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 13
Snap-In Aluminum Electrolytic Capacitors – ALC70, +85°C KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.